La San Marco - solenoid valve group

The gasket on this product page can be used on various heat exchanger (HX) systems on various San Marco espresso machine models. The San Marco part reference numbers for this item are 109078 and CTSGUA0260.  This fibre gasket has a outer diameter of 34mm a inner diameter of 26,5mm and a thickness of 2mm. This gasket has been made in Italy. You...

On this page you will find a copper gasket, not just a copper gasket but a crushable version. This specific model has an outer diameter of 22mm an internal diameter of 17mm and a height of 3mm. Copper crushable washers can be used in various pump and boiler related applications. You need to tighten the fitting enough to crush the copper, which makes the...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

This item is a nozzle/gigleur used in various La San Marco espresso machine brewing groups. The La San Marco part references for this item are 400167 and BVASS1400. This nozzle is made from 3 individual components. These items are machines from brass. This item has been made in Italy. You can use this nozzle on the San Marco 85 and the San Marco 95.

The gasket on this page is a group locking gasket used on various La San Marco espresso machine models. The La San Marco part reference for this item is 109070  This gasket is made from a fibre material. The length of the gasket is 95mm and the width is 45mm. there are 2 holes for threads and one for a supply tube. This gasket has been made in Italy...

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...

The single filterbasket on this page can be used on La San Marco espresso machines. The La San Marco part reference for this filterbasket is 202122. This filterbasket has been made by the Italian company IMS Filtri. The part reference from IMS is SM1T118. This single coffee filterbasket has a outer diameter of 66mm and a height of 25,5mm. This...

La San Marco PTFE HX gasket 34x27x2mmReturn to the  San Marco group parts overview