La San Marco - solenoid valve group

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

On this page you will find a copper gasket, not just a copper gasket but a crushable version. This specific model has an outer diameter of 22mm an internal diameter of 17mm and a height of 3mm. Copper crushable washers can be used in various pump and boiler related applications. You need to tighten the fitting enough to crush the copper, which makes the...

The portafilter gasket on this page is a OEM/Original La San Marco portafilter gasket. The La San Marco part reference is 109011. This gasket has been made from NBR. The outer diameter of this gasket is 64mm the inner diameter is 52,5mm and the thickness of the gasket is 5,5mm. The gasket has on the outside 3 cuts. The gasket has been made in Italy. You...

The portafilter gasket shown on this page can be used on a variety of San Marco espresso machine brewing groups. But the traditional gaskets are made from NBR, but this model has been made from food graded Silicone. The Rancilio part reference for this model of portafilter gasket is 109011 and 109130  This blue silicone portafilter gasket has a...

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The single filterbasket on this page can be used on La San Marco espresso machines. The La San Marco part reference for this filterbasket is 202122. This filterbasket has been made by the Italian company IMS Filtri. The part reference from IMS is SM1T118. This single coffee filterbasket has a outer diameter of 66mm and a height of 25,5mm. This...

Every brewing group uses a shower screen. Some shower screens are held in place with the portafilter, some do use a flat head or Philips head screw or a hex bolt. In the case of La Spaziale you will typically find the stainless steel hex head screws with the dimensions of M5x25 (La Spaziale code 0643) This handy T shaped tool can be used to unscrew the...

On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...

The item on this product page is a drain pipe used on various La San Marco espresso machines. This drain pipe is used on older models La San Marco brewing groups. The part reference numbers for this item are 205751 and CCMMIN2790.  This drain tube has been made from brass. the fitting on the top is a 1/8” fitting. The Length of the tube...

The item on this page is a thermal tube for various La San Marco espresso machines. This thermal tube is a OEM/Original La San Marco spare part. The part references for this item are 507440 and BRSTA0050.  This thermal pipe has been made from copper and has a diameter of 50mm. On both sides is a ½” BSP-G thread. The overall length for...