Filter by
Price
Manufacturers
Coffee grinder part type
Type
Filter

Mazzer Super Jolly doser

Mazzer Super Jolly doser spare parts

The coffee grinder on this model page is the Mazzer Super Jolly doser version, this coffee grinder is ideally used in bars, restaurants, hotels. This commercial coffee grinder is one of the Doser type. This means that there is doser on the front of the coffee grinder which holds a specific amount of pre-ground coffee. This is different then for instance a on demand coffee grinder where the coffee is ground on request.

The Mazzer Super Jolly Doser is available in a single phase 110 and 230V version, these models require a start capacitor. Note there are various versions of start capacitor available. There is also a tree phase version of the Mazzer Super Jolly coffee grinder available.

This specific coffee grinder uses flat grinding burrs. With a clockwise turning direction. The outer diameter is 64mm, the internal diameter is 37mm and the thickness is 8,4mm. There are 3 mounting holes to install the grinding burrs.  Note: the single phase burrs are not identical to the 3 phase grinding burrs.

Mazzer Super Jolly doser coffee grinder parts

Mazzer coffee tamper 54.5mm

The tamper on this product page is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02 and S000PRA02/QQQ. This original tamper has been made from black plastic. The outer diameter of this tamper is 54,5mm. This tamper has been made in Italy You can use this tamper on a...
€25.88

Mazzer lower microrelease spring

The spring on this product is a OEM/Original Mazzer spare part.  The Mazzer part reference for this item is S000MOB06. This compression spring is the lower micro release spring. This spring has a outer diameter of 13mm a inner diameter of 10,53 and a length of 15mm. This spring has been made in Italy. This spring is used in the doser versions of...
€2.99

Mazzer compensation ring 32mm

The item on this product page is a OEM/Original Mazzer spare part. This item is a compensation ring used in a Mazzer doser system. The part reference numbers for this item are S000ANA01, S000ANA01/AQQ and S000ANA01/QQQ. This compensation ring has a outer diameter of 32mm and has been made in Italy. This compensation ring can be used on the Mazzer...
€4.73

Mazzer burrs spring 10x23.6mm

On a variety of Mazzer coffee grinders you can find this grind adjustment spring. So, what does this spring do? Well, this spring supports the upper burr holder. So, when the burrs are set on the finest position, but you want to make them a bit coarser. You turn the grind setting adjustment ring outward. The springs will push the upper burr in its correct...
€4.52

Mazzer adjustment ring

On this page you will find the Mazzer burr adjustment ring. When you want a finer or coarser setting on your Mazzer burrs, you just need to turn this brass and threaded adjustment ring inward or outward. You can do this with the adjustment ring pin, with a m5 thread, which stick into the side of the burr adjustment ring(S00SPEA00) on various locations of...
€160.86

Lovato contactor BG0910A

The contactor on this product pave can be found on a wide selection of coffee grinders. You can find them on grinders from Mazzer, Gaggia, Macap, La Spaziale, Quamar and Astoria. But this contactor can also be used on various La Cimbali espresso machines. This contactor has been made by the Italian company Lovato. The model is called the BG0910A. This...
€53.07

Mazzer adjustment ring pin M5

How am I going to adjust the grind adjustment on my Mazzer coffee grinder? Well your burrs can be adjusted with the burr adjustment ring (SSJ0GHA02) this pin goes into the side of this ring in one of the 5 mounting holes. This specific adjustment pin screws into one of these 5 holes with a M5 thread. Note: if the ring doesn’t move because it is...
€27.27

Bipolar timer 50 seconds 16A 250V

Some coffee grinder models use a timer switch to turn on the coffee grinder. This specific switch is used with grinders, primarily doser models, of the brands Astoria, Fiorenzato M.C. and Mazzer. For Astoria you can find this timer switch in models such as the Astoria Super Jolly and the Astoria Major. For Fiorenzato you can find them in various models of...
€59.06

Mazzer doser lid 125mm

Some of the grinders Mazzer manufacturers are doser versions. These doser versions have a container in the front of the grinder housing. This doser contains a ready to use amount of ground coffee. This doser has a fixed size for Mazzer grinders, so as well for the specific item on this page. The doser lid. This item has a external diameter of 125mm and is...
€13.08

Mazzer coffee tamper 57.5mm

The tamper on this product p age is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02/QCQ, S000PRA02C and S000PRA02-C. This original tamper has been made from black plastic. The outer diameter of this tamper is 57,5mm. This tamper has been made in Italy You can use...
€26.30

Grinding blades Mazzer Super Jolly 64mm

On this product page you will find a pair of grinding blades which are suitable for the Mazzer Super Jolly as well for the Astoria Super Jolly. The Astoria part reference for this is 28213 and for Mazzer the part reference is FMA00033M  This set of grinding blades has a outer diameter of 64mm a inner diameter of 37mm and a thickness of 8,4mm. The burrs...
€32.84

Mazzer upper star with pin

The item on this page is a the top dosing star. It is used in the doser machines of Mazzer. This item is a OEM/Original Mazzer spare part. The part references for this item are SMJSSTA04 and SSJSSTA04 This male doser star has been casted and machined afterwards. The outer diameter of this star is 108mm. This upper star has been made in Italy. You can...
€36.74