Vibiemme Domobar Super غلاية HX

The item on this page is a PTFE heating element gasket, which is used on various espresso machine brands such as Casadio, San Remo, Vibiemme, Grimac , Brasilia and Astoria. The part reference numbers for this heating element gasket can be found in the extra info tab. As mentioned before this gasket has been made from PTFE. The outer diameter is 53mm, the...

On this product page you will find a pump pressure gauge suitable for the Vibiemme Domobar Super. This manometer has the Vibiemme part reference MANMSEM16. The manometer is a pump pressure manometer with a reach from 0 to 16bar.  The body of this manometer has a outer diameter of 41mm and a rim diameter of 50mm. On the back is a copper tube with a...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

On this product page you will find a heating element suitable for various Vibiemme single group espresso machines. The Vibiemme part reference for this element is ELETRESSM1822  This heating element produces 1800W at 230V, there are 2 connecting poles. The immersed length of this element is 140mm. The flange used is a screw in flange which has a...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...