Faema e61을 새 보일러로 전환하는 경우 이 보일러 피팅을 동시에 주문하는 것이 실용적일 수 있습니다. 보시다시피 새 보일러에는 이 피팅이 제공되지 않습니다. 황동으로 주조 및 가공된 이 피팅에는 2면에 ½”BSP-G 수나사가 있습니다. 한쪽에는 ¼”BSP-G 암나사가 있습니다. 따라서 한쪽은 HX 하단에, 다른 쪽은 추출 그룹에 연결되는 파이프에 나사로 고정하십시오. 이 내부 나사산은 새 물을 주입하기 위한 주입기 튜브용입니다. 이 항목은 이탈리아에서 만들어졌습니다.
이것은 당신의 Ulka espresso 기계 진동 펌프를 위한 보호의 여분 층입니다. 당신의 펌프가 건조하거나 방법 너무 많은 것을 달리는 때, 온도는 상승하고 결국 전기 성분은 끊을 것입니다. 이 열 보호자로 당신의 진동 펌프는 저장될 것입니다, 그러나 열 보호는 실패할 것입니다. 이 특정한 모형에는 110°C의 최대 온도가 있습니다. 열 보호자에는 남성 6,3mm 스파드 연결관 및 6,3mm 스파드를 위한 1개의 여성 연결관이 있습니다. 이 열 보호자가 당신의 Ulka 진동 펌프를 위해 적당하다면, 다만 저희에게 연락하고 우리는 당신을 도울 수 있을지도 모릅니다.
이 페이지에서 진동 펌프용 고무 지지대를 찾을 수 있습니다. 이 지지대에는 1개의 중앙 구멍과 장착 구멍이 있습니다. 장착 구멍은 고무 펌프 지지대를 에스프레소 머신의 프레임에 연결하기 위한 것입니다. 다른 구멍은 에스프레소 머신 진동 펌프 참을 붙이기 위한 것으로, 압입식입니다. 각 진동 펌프에 대해 2개의 지지대가 필요합니다. 입구용 1개와 출구용 1개입니다(플라스틱 콘센트의 황동 콘센트일 수 있음). 이 고무 장착 지지대는 Ulka 및 Olab의 모터와 함께 사용할 수 있습니다. 에스프레소 머신에서 가장 일반적인 진동 펌프 모터는 무엇입니까? 장착 지지대는 일반 품목이므로 Saeco, Vibiemme, La Pavoni,...
새 보일러로 Faema e61을 재조립하는 경우 이 보일러 피팅을 함께 주문하는 것이 편리할 수 있습니다. 새 보일러에는 이 피팅이 제공되지 않습니다. 이 황동 주조 및 가공 피팅에는 2면에 수 ½”BSP-G 나사산이 있습니다. 따라서 보일러의 HX 한쪽에 나사로 고정하고 다른 한쪽은 추출 그룹에 나사로 고정합니다. 이 항목은 이탈리아에서 제조되었습니다.
이 페이지에서 수 3/8” BSP-G 나사산이 있는 안전 밸브를 찾을 수 있습니다. 이 밸브의 사전 설정 압력은 1,8bar입니다. 직접 조정할 수 있지만 권장하지는 않습니다. 안전 밸브 내부의 스프링은 스테인리스 스틸로 만들어졌으며 밀봉재는 FKM입니다. 밸브는 이탈리아에서 제작되었습니다. 매년 안전 밸브를 교체할 것을 강력히 권장합니다. 저렴한 품목이지만 정말 중요합니다.
The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...
On this product page you can find a pump pressure gauge suitable for various Vibiemme espresso machine models. The reference item number of Vibiemme is MANMDOE40016 . This manometer has a shiny chrome looking rind which has a outer diameter of 47mm, the body of this manometer is 40mm. The scale of the boiler pressure gauge goes from 0 to 16 bar pump...
The item on this page is a PTFE heating element gasket, which is used on various espresso machine brands such as Casadio, San Remo, Vibiemme, Grimac , Brasilia and Astoria. The part reference numbers for this heating element gasket can be found in the extra info tab. As mentioned before this gasket has been made from PTFE. The outer diameter is 53mm, the...
On this page you will find a flat silicone gasket. This silicone gasket is 10x5mm. It is being used in 2 applications with Vibiemme ( GUARSILRUDOSU ) espresso machines. The first is in the steam and water valve of the Vibiemme Domobar and in the expansion valve used in the Domobar super. If you are not sure if this silicone blind gasket is...
On this product page you will find a pump pressure gauge suitable for the Vibiemme Domobar Super. This manometer has the Vibiemme part reference MANMSEM16. The manometer is a pump pressure manometer with a reach from 0 to 16bar. The body of this manometer has a outer diameter of 41mm and a rim diameter of 50mm. On the back is a copper tube with a...
On this product page you will find a boiler pressure gauge suitable for the Vibiemme Domobar Super. This manometer has the Vibiemme part reference MANMSEM. The manometer is a boiler pressure manometer with a reach from 0 to 2,5bar. The body of this manometer has a outer diameter of 41mm and a rim diameter of 50mm. On the back is a copper tube with...
The pressure switch on this product page is made by the Italian company Ma-Ter. This company produces a variety of pressure switches. This pressure switch is mainly used on Vibiemme espresso machines. The Mater part reference number for this item is XP742C410015. The Vibiemme part reference number for this item is ELETPREDSUKIR This pressure...
The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...
The solenoid valve on this product page is one made by the Italian company ODE. This solenoid valve can be used on various Vibiemme (VBM) water inlet valves. The Vibiemme part reference number is ELETELE2VAU22. This Solenoid valve is a 2 way valve. Both the in and outlet side have a 1/8” BSP-G thread. The diameter of the orifice is 1,5mm. The seal...
The solenoid valve on this page is a product made by ODE. In this case it is a 2 way solenoid valve with the part number 212A3KV30. As mentioned this solenoid valve is a 2 way valve. The in and outlet on this valve are both 1/8” BSP female. In the body of the solenoid valve is a orifice located with the diameter of 3mm. So seal this off there is a...
The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |