필터링 기준
상표
more... less
유형 부분
개스킷 재질
두께
외경(OD)
내경(ID)
more... less
유형
Filter

브루잉 그룹 개스킷

양조 그룹을 사용하는 것은 누출이 없을 때 이상적입니다. 그것이 유출 될 때 기회는 꽤 큰 가스켓이 더 이상 작용하지 않습니다.

양조 그룹에는 다양한 유형의 가스켓이 사용되고 있으며, 이들은 섬유 가스켓, PTFE, 플랫 구리 및 분쇄 구리 가스켓이 될 수 있습니다. 모든 가스켓은 프로그리고 단점.

당신은 몇몇 에스프레소 기계 제조자가 틈막이의 1가지의 유형을 더 그 후에 다른 것을 사용한다는 것을 볼 수 있습니다. 그러나 치수가 같은 다른 재료가 교환 할 수 있다면.  

에스프레소 커피 머신 브루잉 그룹 개스킷
Faema E61 gasket PTFE 36x30x2mm Faema E61 gasket PTFE 36x30x2mm

Faema E61 틈막이 PTFE 36.5x30x2mm

이 PTFE 틈막이는 유명한 Faema E61 양조 그룹에 사용될 수 있습니다, 또한 양조 그룹의 다양한 E61 작풍에. La Scala, Grimac, Pavoni, Wega 및 Fiorenzato와 같은. 부품 참조 번호는 추가 정보 탭에서 찾을 수 있습니다. 이 편평한 틈막이는 물자 PTFE에게서 합니다. 외부 직경은 36,5mm이고 안 직경은 30mm이고 2mm의 간격이 있습니다. 이 PTFE 틈막이는 이탈리아에서 합니다. Faema E61, Faema E61 Legend, Faema E61 Jubilee, Pavoni Bar, Pavoni Bart, Pavoni Pub, Grimac Mia, Grimac Zola,...
€0.94
Quick-view
PTFE 틈막이 26x21x2mm

PTFE 틈막이 26x21x2mm

이 틈막이는 독일에서 섬유 물자 AFM 34에게서 했습니다. 이 틈막이에는 21의 안과 2mm의 간격의 외부 직경이 있습니다. 이 틈막이는 espresso 기계 전체에 각종 성분에서 사용됩니다. 이 커피 기계 틈막이가 사용되는 가장 일반적인 장소는 Faema E61, Faema E61 전설 및 E61 작풍 양조 그룹에서 입니다. Vibiemme, Reneka, Expobar, Grimac, La Scala 및 Bezzera와 같은. 그러나 이 틈막이를 위한 다른 일반적인 위치는 Vibiemme espresso 기계에 예를 위한 물 인레트 벨브 또는 Fiorenzato와 Grimac입니다 올바른 제품을 선택했는지 확실하지 않은...
€1.38
Quick-view
PTFE gasket 35x30x2mm PTFE gasket 35x30x2mm

PTFE 개스킷 35x30x2mm

이 페이지의 개스킷은 치수가 35x30x2mm인 폴리테트라플루오로에틸렌(PTFE) 개스킷입니다. 이 특정 개스킷은 E61 스타일 브루잉 그룹의 3개 특정 위치에 사용됩니다(Faema E61 및 Faema E61 범례 그룹은 다른 크기의 ptfe 개스킷을 사용함). 상단 트럼펫 또는 드레인 슬리브, 그룹 측면에는 캠 홀더, 하단에는 그룹 수집기를 밀봉하는 데 사용됩니다. 이 PTFE 개스킷은 다양한 E61 스타일 양조 그룹에 사용됩니다. San Remo, ECM Heidelberg, Vibiemme, Bezzera, Isomac 및 Brasilia와 같은 브랜드는 양조 그룹에서 이 개스킷을 사용합니다. 이 PTFE...
€1.47
Quick-view
PTFE gasket 22x17x1,5mm PTFE gasket 22x17x1,5mm

PTFE gasket 22x17x1,5mm

The PTFE gasket on this page is mainly used for machines made by the Cimbali group. You will find this PTFE gasket in hydraulic circuits, brewing groups, steam and water valves and water inlet valves. The Casadio part number for this gasket is 401183010, the Cimbali Part number is 401183010 / 401-183-010 and for Faema the part number is...
€1.13
Quick-view
Rancilio Silvia portafilter gasket original Rancilio Silvia portafilter gasket original

Rancilio Silvia portafilter gasket original

On this product page you will find a OEM/original portafilter gasket suitable for the Rancilio Silvia domestic espresso machines. This portafilter gasket is suitable for all the brewing groups. The Rancilio part reference for this item is 36301030  The outer diameter of this portafilter gasket is 74mm, the inner diameter is 58mm and the thickness is...
€8.03
Quick-view
Filterholder gasket 73x57x8mm Filterholder gasket 73x57x8mm

Filterholder gasket 73x57x8mm

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...
€5.53
Quick-view
Copper gasket 18x14x1.5mm 1/4" Copper gasket 18x14x1.5mm 1/4"

구리 개스킷 18x14x1.5mm

이 제품 페이지의 플랫 구리 개스킷은 다양한 에스프레소 머신과 다양한 용도로 사용할 수 있습니다. Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega 및 Rancilio와 같은 에스프레소 머신에서 이 구리 개스킷을 사용할 수 있습니다. 주로 보일러와 물 및 증기 밸브를 밀봉하기 위해 이 구리 개스킷을 사용하는 것을 볼 수 있습니다. 이 구리 개스킷은 수 ¼” BSP-G 피팅을 밀봉하는 데 사용할 수 있습니다. 이 개스킷은 평평하고 구리로 만들어졌습니다. 외경은 18mm, 내경은 14mm, 두께는...
€2.23
Quick-view
PTFE gasket 50x40x2mm PTFE gasket 50x40x2mm

PTFE gasket 50x40x2mm

The item on this page is a polytetrafluoroethylene (PTFE) gasket. This gasket has various applications in espresso machines. These applications are sealing components in the boiler and brewing group. The gasket itself has a outer diameter of 50mm. the inner diameter of the gasket is 40mm and the thickness is 2mm. The PTFE gasket is used in the brewing...
€1.55
Quick-view
AFM 34 gasket 26x21x2mm AFM 34 gasket 26x21x2mm

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.16
Quick-view
PTFE flat gasket 53x43x3mm PTFE flat gasket 53x43x3mm

PTFE flat gasket 53x43x3mm

The item on this page is a PTFE heating element gasket, which is used on various espresso machine brands such as Casadio, San Remo, Vibiemme, Grimac , Brasilia and Astoria. The part reference numbers for this heating element gasket can be found in the extra info tab. As mentioned before this gasket has been made from PTFE. The outer diameter is 53mm, the...
€2.06
Quick-view
Rancilio flat copper gasket 24x20x1mm Rancilio flat copper gasket 24x20x1mm

Rancilio 평면 구리 개스킷 24x20x1mm

이 페이지의 개스킷은 PTFE 또는 섬유 소재 대신 구리로 만들어졌습니다. 구리 개스킷은 주로 Rancilio 에스프레소 머신에 사용됩니다. 이 항목의 Rancilio 부품 번호는 27400001입니다. 이 구리 개스킷은 플랫 타입이므로 구리 압축 개스킷이 아닙니다. 이 개스킷의 외경은 24mm, 내경은 21mm, 두께는 1mm입니다. 개스킷은 Rancilio 에스프레소 머신의 다양한 용도로 사용됩니다. Rancilio Classe 10. Rancilio Classe 9, Rancilio Classe 8, Rancilio Classe 7 및 Rancilio Classe 6에 사용되는 스팀 및 물 막대부터 Rancilio Classe...
€1.55
Quick-view
Gasket AFM 34 22x16x2mm Gasket AFM 34 22x16x2mm

Gasket AFM 34 22x16x2mm

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...
€1.36
Quick-view
AFM34 gasket 36x30x2mm AFM34 gasket 36x30x2mm

AFM34 gasket 36x30x2mm

The gasket on this product page is used on the Faema E61 brewing groups and the E61 style of brewing groups such as with Rocket, La Scala, Grimac, la Pavoni and Wega. The part reference numbers for this gasket can be found in the extra info tab. This gasket is made from AFM34 from the company Victor Reinz. This gasket has good sealing properties, even...
€1.23
Quick-view
La Carimali ptfe gasket...

La Carimali ptfe gasket 24x20x1.5mm

The item on this product page is a OEM/Original PTFE gasket. This gasket is used on the La Carimali Pratica brewing groups. The Carimali part reference number for this gasket is 88.00054. This OEM gasket has been made from PTFE. The outer diameter is 24mm, the inner diameter is 20mm and the thickness is 1,5mm. This gasket has been made in Italy.
€3.18
Quick-view
Astoria PTFE gasket 33x28x4mm Astoria PTFE gasket 33x28x4mm

Astoria PTFE gasket 33x28x4mm

The item on this product page is a flat PTFE gasket, this gasket is a OEM/Original Astoria Spare part. The Astoria part reference number for this item is 12012006. This gasket is made from the material PTFE. The outer diameter is 33mm, the inner diameter is 28mm and the thickness is 4mm. This gasket is made in Italy. This gasket can be used on the...
€8.03
Quick-view
Crushable copper washer 33x26x3mm Crushable copper washer 33x26x3mm

분쇄 가능한 구리 와셔 33x26x3mm

This item is a copper crushable gasket. this gasket can be used on various Faema espresso machines. This gasket is used in the brewing groups on older Faema espresso machines. This gasket is made from copper the outer diameter is 33mm, the inner diameter is 26mm and the thickness is 3mm. this gasket is made in Italy. You can use this copper gasket on...
€1.20
Quick-view
La Pavoni ptfe gasket...

La Pavoni ptfe gasket 26x22x1,5mm

The gasket on this page is a original/OEM la Pavoni spare part. this is a gasket used in various brewing groups. The La Pavoni part reference number for this item is 362065 and 362069 This PTFE gasket has a outer diameter of 26mm, the inner diameter is 22mm and the thickness of this gasket is 1,5mm. You can use this gasket on the brewing groups of the...
€5.45
Quick-view
Gasket PTFE 10x7.3x0.5mm Gasket PTFE 10x7.3x0.5mm

틈막이 PTFE 10x7.3x0.5mm

The gasket on this page is a PTFE gasket used on various older Faema brewing groups. This gasket can be used on the Faema E64, Faema E66, Faema P4 and the Faema P5. This gasket is made from ptfe. The outer diameter is 10mm, the inner diameter is 7mm and the thickness is 0,5mm. This gasket is made in Italy
€0.79
Quick-view
PTFE gasket 21,2x16,5x2,5mm

PTFE gasket 21,2x16,5x2,5mm

The gasket on this product page is made from the material PTFE. This PTFE gasket can be used to seal off male 3/8”BSP-G threads. Such as boiler safety valves, anti vacuum valves and steam and water valves. The outer diameter of this gasket is 21,2mm, the inner diameter is 16,5mm and the thickness is 2,5mm
€1.05
Quick-view
PTFE gasket 24x18x2mm

PTFE gasket 24x18x2mm

The item on this product page is a PTFE gasket. This gasket is in use in various applications such as brewing groups, steam and water valves and water inlet valves. You can use this gasket with brands such as Carimali, Vibiemme, Scala, Grimac, Astoria, Pavoni, Wega and Victoria Arduino This gasket has been made from the material PTFE. The outer diameter...
€2.25
Quick-view
La Carimali ptfe gasket...

La Carimali ptfe gasket 19x14.5x2mm

The gasket on this page is a OEM/original La Carimali gasket. This gasket is used on the brewing groups of the Carimali Pratica. The Carimali part reference number for this item is 88.00017  This gasket has been made from PTFE. This gasket has a outer diameter of 19mm a inner diameter of 14,5mm and a thickness of 2mm. This gasket has been made in the EU.
€5.24
Quick-view
La Carimali 1/4" brewing...

La Carimali 1/4" brewing group cap

The item on this product page is a OEM/Original brewing group plug. This plug is used on the Carimali Pratica brewing group. The Carimali part reference number for this brass fitting 22.00664. This OEM brass fitting has a male ¼” thread and is used to seal off the gigleur/nozzle and filter compartment.  This item has been made in the EU.
€13.48
Quick-view
La San Marco conical ptfe...

La San Marco conical ptfe gasket 10x4x6mm

This item is a conical PTFE gasket. This gasket is used with various brewing groups of La San Marco. The part references for this item are 106151 and CMPTOR0020. This conical gasket has been made from PTFE. The outer diameter of this gasket is 10mm. the inner diameter is 4mm and the thickness is 6mm. This gasket has been made in Italy.  This...
€4.54
Quick-view