필터링 기준
Price
€ €
Manufacturers
커피 그라인더 부품 유형
유형
Filter

Mazzer 미니 도저

Mazzer 소형 투과기 예비 품목

이 커피 그라인더는 Mazzer Mini 투여기 커피 그라인더입니다. 이 커피 그라인더는 국내 커피 그라인더입니다. 그러나 때때로 바, 레스토랑 및 일부 사무실에서 볼 수 있습니다.

Mazzer Mini 투여기는 투여기 모델 인 Mazzer mini의 유일한 버전입니다. 나머지, Mazzer Mini A 및 Mazzer Mini B는 모두 수요 커피 그라인더에 그립니다.

Mazzer Mini Doser에 사용되는 커피 연삭 burrs는 아니다 mazzer Mini A 및 Mazzer Mini B와 호환됩니다. 이 가는 숫돌의 도는 방향은 시계 방향으로 입니다. 외부 직경은 58mm입니다, 내부 직경은 33,5mm이고 간격은 8,5mm입니다. 3개의 설치 구멍이 있습니다.

Mazzer 소형 투약자는 선택권 110V와 220/240V에서 단상 커피 그라인더로, 유효합니다. 이 분쇄기는 단상 모형, 모터이고 그 후에 모터 시작 축전기를 요구합니다.

Mazzer 미니 도저 커피 그라인더 부품
Mazzer burrs spring 10x23.6mm Mazzer burrs spring 10x23.6mm

Mazzer burrs spring 10x23.6mm

On a variety of Mazzer coffee grinders you can find this grind adjustment spring. So, what does this spring do? Well, this spring supports the upper burr holder. So, when the burrs are set on the finest position, but you want to make them a bit coarser. You turn the grind setting adjustment ring outward. The springs will push the upper burr in its correct...
€5.67
Quick-view
Ducati Energia capacitor 6,3µF 450V Ducati Energia capacitor 6,3µF 450V

Ducati Energia capacitor 6,3µF 450V

The capacitor on this page is a 6,3µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1064. This capacitor can be found on a variety of coffee grinders and pump motors of the brands such as Carimali, Bezzera, Cimbali , Pavoni, Mazzer, Macap and Compak This capacitor produces 6,3µF  at 450V...
€6.06
Quick-view
Mazzer machine foot M5x0.75 Mazzer machine foot M5x0.75

Mazzer machine foot M5x0.75

Almost every Mazzer coffee grinder has 4 individual feet to give it stability in harsh working environments. The feet are made up out of 2 parts. The feet itself. This is a rubber feet with a metal stud sticking out of it. This thread is a M5x0,75mm. The next part is the stainless steel cup which goes over the rubber feet. These feet are only sold per 4...
€7.42
Quick-view
Mazzer adjustment ring pin M5 Mazzer adjustment ring pin M5

Mazzer adjustment ring pin M5

How am I going to adjust the grind adjustment on my Mazzer coffee grinder? Well your burrs can be adjusted with the burr adjustment ring (SSJ0GHA02) this pin goes into the side of this ring in one of the 5 mounting holes. This specific adjustment pin screws into one of these 5 holes with a M5 thread. Note: if the ring doesn’t move because it is...
€34.21
Quick-view
Mazzer coffee tamper 57.5mm Mazzer coffee tamper 57.5mm

Mazzer coffee tamper 57.5mm

The tamper on this product p age is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02/QCQ, S000PRA02C and S000PRA02-C. This original tamper has been made from black plastic. The outer diameter of this tamper is 57,5mm. This tamper has been made in Italy You can use this...
€32.99
Quick-view
Mazzer coffee tamper 54.5mm Mazzer coffee tamper 54.5mm

Mazzer coffee tamper 54.5mm

The tamper on this product page is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02 and S000PRA02/QQQ. This original tamper has been made from black plastic. The outer diameter of this tamper is 54,5mm. This tamper has been made in Italy You can use this tamper on a...
€32.47
Quick-view
Mazzer doser lid 125mm Mazzer doser lid 125mm

Mazzer doser lid 125mm

Some of the grinders Mazzer manufacturers are doser versions. These doser versions have a container in the front of the grinder housing. This doser contains a ready to use amount of ground coffee. This doser has a fixed size for Mazzer grinders, so as well for the specific item on this page. The doser lid. This item has a external diameter of 125mm and is...
€16.41
Quick-view
Mazzer mini coffee collecting tray Mazzer mini coffee collecting tray

Mazzer mini coffee collecting tray

When you are grinding coffee and filling your portafilter with coffee, it will always happen that you spill coffee grounds. That is why there are with most coffee grinders coffee collecting trays. These are normally stainless steel trays, with some brands you see that those are made from a kind of plastic. For the Mazzer Mini they are made from polished...
€59.18
Quick-view
Bipolar switch black 16A 250V Bipolar switch black 16A 250V

양극 스위치 검정 16A 250V

The bipolar switch on this product page can be used on various coffee grinder brands. Such as Cimbali and Mazzer. The part references of these models can be found in the extra info tab. This black bipolar switch has been rated up to 16A at 250V. The switch has a led indicator light when turned on. The mounting hole is 22x30mm. The switch has been made in...
€16.42
Quick-view
Lovato contactor BG0910A Lovato contactor BG0910A

Lovato contactor BG0910A

The contactor on this product pave can be found on a wide selection of coffee grinders. You can find them on grinders from Mazzer, Gaggia, Macap, La Spaziale, Quamar and Astoria. But this contactor can also be used on various La Cimbali espresso machines. This contactor has been made by the Italian company Lovato. The model is called the BG0910A. This...
€60.56
Quick-view
Mazzer timer 50 seconds 16A 250V Mazzer timer 50 seconds 16A 250V

Bipolar timer 50 seconds 16A 250V

Some coffee grinder models use a timer switch to turn on the coffee grinder. This specific switch is used with grinders, primarily doser models, of the brands Astoria, Fiorenzato M.C. and Mazzer. For Astoria you can find this timer switch in models such as the Astoria Super Jolly and the Astoria Major. For Fiorenzato you can find them in various models of...
€88.64
Quick-view
Mazzer motor rotation sticker Mazzer motor rotation sticker

Mazzer motor rotation sticker

The sticker on this page basically says it all. It’s a Mazzer rotation sticker. The reason why they place this seen there are left and right turning motors. You do have also with a variety of brands where the motor spins the left way, like with Mazzer. But there are also brands which have a right turning motor. The blade design of the burrs for such...
€4.63
Quick-view
Mazzer sticker coarse - fine

Mazzer sticker coarse - fine

This sticker is used on a variety of Mazzer coffee grinders. This sticker, which shows what the effects are of turning. If you turn the adjustment ring left is coarse and to the right this will be finer ground. So the space between the burrs to the left becomes bigger and to the right the distance between the burrs becomes smaller. This coarse fine...
€4.35
Quick-view
Mazzer adjustment ring

Mazzer adjustment ring

On this page you will find the Mazzer burr adjustment ring. When you want a finer or coarser setting on your Mazzer burrs, you just need to turn this brass and threaded adjustment ring inward or outward. You can do this with the adjustment ring pin, with a m5 thread, which stick into the side of the burr adjustment ring(S00SPEA00) on various locations of...
€201.78
Quick-view
Mazzer mini funnel gasket...

Mazzer mini funnel gasket with mesh

On this page you will find a kit for the Mazzer Mini Electronic. This specific kit is installed between the grinder housing of the Mazzer Mini and the Funnel. The gasket is there to keep the wire mesh in place. The wire mesh has the dimensions of 36x32mm. this specific mesh is only suitable for 220/240V models of the Mazzer Mini Electronic A and Mazzer...
€34.62
Quick-view
Mazzer doser cylinder 120x70mm

Mazzer doser cylinder 120x70mm

The Mazzer doser coffee grinders have a doser reservoir on the front of the coffee grinder. You do need to see visually how much coffee there is still left in the doser. Therefore the doser is partially made from a transparent plastic so that you can see how much there is left. The disadvantage is this clear plastic can get dirty, and can’t be...
€34.74
Quick-view
Mazzer doser cylinder 120x70mm Mazzer doser cylinder 120x70mm

Mazzer doser adjustment knob

This grinder doser regulator knob is used in most Mazzer doser grinders. As well as some Astoria coffee grinders. With this knob you can adjust the dosing amount from the coffee doser. This specific item has a internal thread which is a M8 female thread. This specific model of adjustment knob is being used in some models of Astoria, like the Astoria...
€31.24
Quick-view
Mazzer doser pressure spring

Mazzer doser pressure spring

The doser pressure spring is a spring type you would only find, you probably guest it, in the doser. This spring is used to keep pressure on the doser stars. This spring has a outer diameter of 14,6mm a inner diameter of 12,2mm and a effective height of 51mm. It is a original Mazzer grinder part. You will find this specific spring in the doser of the...
€5.69
Quick-view
Mazzer doser star female Mazzer doser star female

Mazzer doser star female

The item on this product page is a OEM/Original Mazzer spare part. Is a female start used in the coffee doser. The Mazzer part references for this item are S000STA03, S000STA03/B and S000STA03/BQQ. This female dosing star has been made in Italy  This item can be used on the Mazzer M100, Mazzer Mini, Mazzer Lux, Mazzer Super Jolly, Mazzer Major,...
€56.90
Quick-view
Mazzer coffee tamper 53mm Mazzer coffee tamper 53mm

Mazzer coffee tamper 53mm

The tamper on this product p age is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02/A, S000PRA02/QAQ. S000PRA02A and S000PRA02-A. This original tamper has been made from black plastic. The outer diameter of this tamper is 53mm. This tamper has been made in Italy You...
€28.23
Quick-view
Mazzer compensation ring 32mm

Mazzer compensation ring 32mm

The item on this product page is a OEM/Original Mazzer spare part. This item is a compensation ring used in a Mazzer doser system. The part reference numbers for this item are S000ANA01, S000ANA01/AQQ and S000ANA01/QQQ. This compensation ring has a outer diameter of 32mm and has been made in Italy. This compensation ring can be used on the Mazzer...
€5.94
Quick-view
Mazzer compression ring 32mm Mazzer compression ring 32mm

Mazzer doser pawl

The item on this product page is a OEM/Original Mazzer spare part. The part references for this item are S000CRA01, S000CRA02, S000CRA02/AQQ, S00SCRA02 and S00SCRA02/QQQ. This doser pawl has been made from casted and machined brass. This item is used in the doser mechanism of various Mazzer coffee grinders. The item has been made in Italy. This...
€60.39
Quick-view
Mazzer lower microrelease spring Mazzer lower microrelease spring

Mazzer lower microrelease spring

The spring on this product is a OEM/Original Mazzer spare part.  The Mazzer part reference for this item is S000MOB06. This compression spring is the lower micro release spring. This spring has a outer diameter of 13mm a inner diameter of 10,53 and a length of 15mm. This spring has been made in Italy. This spring is used in the doser versions of...
€3.75
Quick-view