필터링 기준
유형 부분
상표
more... less
Filter

스팀 튜브

상업적인 espresso 기계 증기 관

이 제품 개요 페이지에서는 다양한 에스프레소 머신 스팀 지팡이를 찾을 수 있습니다. 이 스팀 지팡이는 다양한 모양, 재료 및 마무리로 제공됩니다. Nuova Simonelli, Faema, La Cimbali, Rocket, ECM과 같은 다양한 커피 머신 브랜드.

스팀 wand를 선택할 때주의를 지불해야 할 여러 기능이 있습니다.

  • 증기 지팡이가 들어있는 에스프레소 기계의 브랜드는 무엇입니까?
  • 증기 지팡이가 위에 사용될 필요가 있는 에스프레소 기계의 모형은인 무엇, 연결 및 모양은 상표로 변화할 수 있습니다;
  • 젖을 짜는 지팡이의 이음쇠는, 이것은 남성 또는 여성 나사 실일 수 있습니다. 또는 또한 크기에서 다를 수 있습니다;
  • 우유 쪄진 지팡이의 물자, 대부분의 증기 지팡이는 스테인리스에게서 합니다. 그러나 크롬 도금 구리 튜브로 찾을 수 있습니다.
  • 마지막으로 스팀 팁의 종류입니다. 여러 가지 모델이 있습니다. 다만 1개의 구멍 또는 다수 구멍으로. 그들은 모두 우유 서리와 다른 결과를 제공합니다.

내 스팀 wand의 우유를 청소하는 가장 좋은 방법은 무엇입니까? 찐 우유에서 하룻밤을 적시십시오. 이것은 완전히 증기 지팡이와 증기 끝에서 우유 잔류물을 제거합니다.  

에스프레소 커피 머신 스팀 튜브
Anti scorch rubber sleeve for steam wand 8mm 50mm Anti scorch rubber sleeve for steam wand 8mm 50mm

스팀 완드용 안티스코치 고무 슬리브 8mm 50mm

If you have a chrome plated or stainless steel steam tube and you want to move the tube when it is warm. It is likely that you will burn your hands. On this page you will find a rubber sleeve which prevents this. This sleeve can be used on a large selection of steam tubes which have a diameter of 8mm. The overall length of this sleeve is 50mm and has been...
€2.55
Quick-view
Steamtube anti scorch clip Steamtube anti scorch clip

Steamtube anti scorch clip

The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
€2.41
Quick-view
Rubber protecting sleeve for 10mm steamtubes Rubber protecting sleeve for 10mm steamtubes

Rubber protecting sleeve for 10mm steamtubes

The item on this page is a steam and water tube burn protecting sleeve. This specific model of sleeve can be used on various brands of the La Cimbali group such as Faema, Casadio and Cimbali. The part references for these brands are all 927132010 . This rubber grip is suitable for steam and water tubes which have a diameter of 10mm. this specific item has...
€8.67
Quick-view
Faema E61 steam tube Faema E61 steam tube

Faema E61 증기 관

이 제품 페이지에서 Faema E61 espresso 기계에 적합한 완벽한 스팀 튜브를 찾을 수 있습니다. Faema 대통령과 Faema Lambro뿐만 아니라. 이 증기 지팡이에는 250mm의 전체 길이가 있습니다. 벨브에 증기 지팡이를 연결하는 것은 남성 3/8" BSP-G 실입니다. 증기 끝에는 내부 1/8" BSP-G 실이 있고 4개의 증기 분사구가 있습니다. 팁도 쉽게 제거 할 수 있습니다.
€31.81
Quick-view
Stainless steel steam stem 2 holes 1,5mm Stainless steel steam stem 2 holes 1,5mm

스테인리스 스틸 스팀 스템 2구멍 1,5mm

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 2 holes, both have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on it when it is...
€9.77
Quick-view
Stainless steel steam stem 4 holes 1,5mm Stainless steel steam stem 4 holes 1,5mm

스테인리스 스틸 스팀 스템 4구멍 1,5mm

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 4 holes, all of them have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on...
€9.08
Quick-view
Steam stem 2 holes dia 1,5mm M10x1 Steam stem 2 holes dia 1,5mm M10x1

Steam Nozzle 2 holes dia 1,5mm M10x1

On this page you will find a steam tube steam nozzle. This steam nozzle can be used on steam tubes which have a M10x1 thread. This type of M10 thread is a fine threaded model seen the pitch is only 1mm. There are 2 holes in this steam nozzle, both have a diameter of 1,5mm.
€6.28
Quick-view
Vibiemme steam wand 8mm Vibiemme steam wand 8mm

Vibiemme steam wand 8mm

The steam wand on this page is for a Vibiemme(TUBILADOMSU ) Domobar espresso machine. The developed length of the tube is 260mm. the tube itself has a diameter of 8mm. The tube comes with a steam tip with 2 holes and the steam pipe nut to connect the steam tube to the steam valve of the Vibiemme Domobar. If you are not sure if the steam tube is suitable...
€32.14
Quick-view
Steam stem 2 holes dia 1,2mm M10x1 Steam stem 2 holes dia 1,2mm M10x1

Steam stem 2 holes dia 1,2mm M10x1

On this page you will find a steam tube steam nozzle. This steam nozzle can be used on steam tubes which have a M10x1 thread. This type of M10 thread is a fine threaded model seen the pitch is only 1mm. There are 2 holes in this steam nozzle, both have a diameter of 1,2mm.
€5.93
Quick-view
Rancilio Silvia V1/V2/V3 steam tube TEA+ Rancilio Silvia V1/V2/V3 steam tube TEA+

Rancilio Silvia V1/V2/V3 steam tube TEA+

The steam tube on this page is a OEM/Original Rancilio spare part. This steam tube can be used on the older Rancilio Silvia espresso machine models. The Rancilio part reference for this item is 10049046  This steam tube has a outer diameter of 6mm, at the end of this tube is the steam tip. This tip has only 1 hole. The tube comes with a rubber protective...
€19.24
Quick-view
Rancilio Silvia V1 & V2 steam pipe original Rancilio Silvia V1 & V2 steam pipe original

Rancilio Silvia V1 & V2 steam pipe original

This product page you can find a OEM/Original Rancilio steam wand. This steam wand can be used on the Rancilio Silvia V1 and the Rancilio Silvia V2. The Rancilio part reference on this item is 10049046. This steam valve is a chrome plated model. The outer diameter of the steam tube is 6mm. There is a anti burn protection installed, with a rubber sleeve....
€39.45
Quick-view
Astoria Wega stainless steel steam pipe Astoria Wega stainless steel steam pipe

Astoria Wega stainless steel steam pipe

The steam pipe on this page is a stainless-steel steam tube. It is suitable for various models made by Astoria and Wega. The reference numbers for Astoria are 25763009 and for Wega WY25763009  This steam tube has a outer diameter of 10mm and the tube and tip have been made from stainless steel.  The steam tip has 4 steam holes and is made in a hexagonal...
€42.94
Quick-view
Astoria Argenta stainless steel steam pipe Astoria Argenta stainless steel steam pipe

Astoria Argenta stainless steel steam pipe

The steam wand on this page is suitable for a variety of Astoria espresso machines. This part has the Astoria part number 25763116. The stainless-steel steam tube has a diameter of 8mm. The steam tube itself comes with a rubber heat protector, so you won’t burn your fingers while holding the steam wand. The stainless-steel steam stem has a...
€68.77
Quick-view
La Carimali steam pipe La Carimali steam pipe

La Carimali steam pipe

On this product page you will find a steam tube suitable for various La Carimali models. The Carimali part reference for this item is 02.01459.CR. This steam tube does not come with a attachment nut for the steam tube. This steam tube is a chrome plated model. The steam tip is a 1/8” BSP-G thread. The steam tip itself has 4 steam holes. This steam tube...
€28.68
Quick-view
Stainless steel steam stem 3 holes 1,6mm with 1 central hole Stainless steel steam stem 3 holes 1,6mm with 1 central hole

Stainless steel steam stem 3 holes 1,6mm with 1 central hole

On this page you will find a steam nozzle which can be used in combination with some models of  Faema, Casadio and La Cimbali. Note: this steam nozzle has a male thread, so if your original steam nozzle has a male thread as well they are compatible. The steam nozzle has in a circular pattern 3 holes and in the middle a additional one. So I ottal 4...
€9.43
Quick-view
Vibiemme steam wand RH...

Vibiemme steam wand RH original

The item on this product page is a OEM/original Vibiemme spare part. This item is a steam wand use on the right hand side of the espresso machine. The VBM part reference for this item is TUBILANCVADXI  This steam tube comes including the steam tip and attachment nut. The tube has been made from polished stainless steel. the diameter of this tube is 10mm....
€100.68
Quick-view
Gaggia E90-D90 complete steam wand Gaggia E90-D90 complete steam wand

Gaggia E90-D90 complete steam wand

On this product page you will find a OEM/Original complete steam tube for the Gaggia E90 and Gaggia D90. The part reference for this steam tube is RB0856/A. This steam tube has a diameter of 8mm. The fitting side is still in plain copper and brass. The bottom section of the steam wand has been plated. The steam tip used has 4 steam holes. The developed...
€261.45
Quick-view
Faema E92 steam pipe Faema E92 steam pipe

Faema E92 steam pipe

On this product page you can find a stainless steel steam tube which can be used on the Faema E92 espresso machine. The steam tube has on the side where it attaches to the steam valve a male thread of ½”BSP-G. On the side of the steam tip is a thread of 1/8”BSP-G. The steam tip has 4 holes. The tube has a diameter of 10mm. To prevent...
€45.74
Quick-view
Faema E61 steam tube 250mm Faema E61 steam tube 250mm

Faema E61 스팀 튜브 250mm

The steam tube on this page is one which can be used on one of the most iconic espresso machines made, Faema E61. This steam valve can be used on the antique but also on the modern version of the E61. This steam tube is made from chrome plated copper. This tube does come with a steam tube with 4 holes. The fitting used is a male 3/8” BSP-G thread. The...
€21.99
Quick-view
Vibiemme mercury steam pipe Vibiemme mercury steam pipe

Vibiemme mercury steam pipe

On this page you can find a steam tube suitable for the Vibiemme Dosaplus and the Vibiemme Mercury espresso machines. The Vibiemme part reference for this item is TUBIVALF. This steam tube has on the valve side a thread of 3/8” BSP-G, on the steam tip side it has a thread of 1/8” BSP-G. The stem tip has 4 holes.  This 8mm steam tube...
€32.47
Quick-view