필터링 기준
Price
유형 부분
more... less
유형
Filter

Bezzera BZ07 에스프레소 머신 부품 - PM, DE 및 PID 모델

Bezzera BZ07 에스프레소 머신 부품

Bezzera BZ07 에스프레소 머신 은 가정에서 전문가 수준의 커피를 만들고자 하는 홈 바리스타를 위해 설계된 다용도 가정용 에스프레소 머신입니다. 이 머신은 여러 가지 구성으로 제공되며, 각 구성은 개인의 취향에 맞게 다양한 기능을 제공합니다. 더 Bezzera BZ07 는 온도 제어 및 물 공급 옵션에 따라 4가지 주요 버전으로 제공됩니다.

Bezzera BZ07 에스프레소 머신 부품 - PM, DE 및 PID 모델

Bezzera epdm gasket 11x4x4 mm

On this page you will find a EPDM steam valve gasket, this model of gasket can be used on a variety of domestic Bezzera espresso machines. The Bezzera part reference for this item is 5496042 This gasket has a outer diameter of 11 mm a inner diameter of 4mm and the thickness is 4mm. The gasket has been made from EPDM and manufactured in Italy. The steam...
€2.86
Quick-view

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
Quick-view

황동 배출구가 있는 Ulka 진동 펌프 EX5 230V 50/60Hz

이 Ulka 진동 펌프는 EX5 모델이며 220V 50/60Hz에서 작동합니다. 이 특정 모델에는 황동 배출구(1/8"BSP-G)가 있습니다. 플라스틱 배출구가 있는 버전도 있습니다. 펌프는 15bar의 최대 압력과 650cc/min의 최대 유량으로 작동할 수 있습니다. 사용하는 경우 펌프를 올바르게 작동하면 2분 동안 펌프를 작동할 수 있으며 다시 작동하려면 1분 동안 기다려야 합니다. 전압 220V 압력 15바 용량 650cc/분 ~에 2분 끄다 1분 펌프 부품 개요로 돌아가기
€26.74
Quick-view

Ulka 진동 펌프 댐퍼

이 페이지에서 진동 펌프용 고무 지지대를 찾을 수 있습니다. 이 지지대에는 1개의 중앙 구멍과 장착 구멍이 있습니다. 장착 구멍은 고무 펌프 지지대를 에스프레소 머신의 프레임에 연결하기 위한 것입니다. 다른 구멍은 에스프레소 머신 진동 펌프 참을 붙이기 위한 것으로, 압입식입니다. 각 진동 펌프에 대해 2개의 지지대가 필요합니다. 입구용 1개와 출구용 1개입니다(플라스틱 콘센트의 황동 콘센트일 수 있음). 이 고무 장착 지지대는 Ulka 및 Olab의 모터와 함께 사용할 수 있습니다. 에스프레소 머신에서 가장 일반적인 진동 펌프 모터는 무엇입니까? 장착 지지대는 일반 품목이므로 Saeco, Vibiemme, La Pavoni,...
€3.02
Quick-view

Ulka 진동 펌프 흡입 피팅

이 제품 페이지의 항목은 다양한 Ulka 에스프레소 머신 진동 펌프에 사용할 수 있는 항목입니다. 이 펌프 흡입구는 Grimac, Elektra, Fiorenzato, Rancilio, Saeco 및 Gaggia와 같은 브랜드와 함께 사용할 수 있습니다. 이 항목의 Ulka 부품 참조 번호는 8.01.033 입니다. 이 90도 피팅은 산토프렌이라는 플라스틱으로 만들어졌습니다. 내부 펌프 연결부의 직경은 6mm이고 호스 엔드 피팅의 외경은 7,5mm입니다. 이탈리아에서 제작된 상품입니다. Grimac G11, Grimac Mia, Elektra Miniverticale, Rancilio SilviaV1, Rancilio...
€2.76
Quick-view

O 반지 틈막이 epdm 11,91x2,62m m/분

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...
€2.26
Quick-view

O ring 32,93x3,53mm FKM

The o ring on this product page can be used on various Bezzera brewing groups. The Bezzera part reference number for this item is 7496004. This o ring has been made from FKM. The cord diameter of this o ring is 3,53mm and the internal diameter is 32,93mm. You can use this o ring on the Bezzera B2000, Bezzera B2006, Bezzera b3000, Bezzera B2000MN, Bezzera...
€5.93
Quick-view

IMS 더블 필터바스켓 12/18gr B702TH24.5M

많은 filterbasket 크기는 매우 표준화됩니다. 이 IMS filterbasket은 좋은 예입니다. 바구니는 IMS filtra에 의해 만들어지고, 그러나 표준 IMS 바구니 선에서 경쟁 바구니이고.  이 두 배 filterbasket를 위한 IMS 부품 번호는 입니다 B702TH24.5M. 두 배 filterbasket는 스테인리스 304의 음식 안전에게서 합니다. 이 바구니의 외부 직경은 70mm, 몸 직경입니다 60mm입니다. IMS는 58,4mm까지 58mm의 탬퍼 직경을 추천합니다 이 바구니는 또한 단 하나 커피 filterbasket 보다는 많은 구멍이 있습니다. 715 구멍. 그들의 직경은 0,3mm입니다. 지상...
€25.48
Quick-view

Bezzera portafilter gasket o ring 71,2x55x8,1mm

The item on this product page is a OEM/original portafilter gasket o ring used on a variety of Bezzera espresso machines. The part reference number for this item is 7496092 The o ring itself is made from food safe nbr. The cord diameter is 8,1mm, the inner diameter is 55mm and the outer diameter is 71,2mm. You can use this portafilter o ring on the...
€6.23
Quick-view

Wera 샤워 스크린 스크루드라이버

몇몇 경우에, 샤워 스크린은 필립스 또는 배열한 나사인 대부분의 경우에 나사로 붙어 있습니다. 양조 그룹에서 제한된 높이로 인해 정기적인 스크류 드라이버로 제거하기가 어렵습니다. 그러나 당신이 짧게 한 slotted screwdriver가 필요하지만,이 경우 독일 브랜드 Wera에서 하나, 양조 그룹에서 잘 맞는 그래서 그것은 unscrew 및 그것을 밖으로 미끄러지지 않습니다. Screwdriver에는 1,2mm의 간격과 8mm의 폭이 있습니다 표준과 같은 톱 슬롯을 사용하는 몇 가지 브랜드가 있습니다 Nuova Simonelli, La Pavoni, Victoria Arduino · Carimali. ·. 그러나 다른 유형도...
€13.54
Quick-view

실리콘 호스 5x8mm 쇼어 60

이 페이지의 제품은 쇼어 60의 실리콘 호스입니다. 이 호스의 내경은 5mm, 외경은 8mm로 벽 두께는 1,5mm입니다. 이 실리콘 호스는 이탈리아에서 제조되었습니다. 이 제품은 M1 단위로 판매됩니다 이 튜브는 주로 물 탱크에서 진동 펌프로의 공급 라인으로 사용됩니다. 이 유형은 심발리, 파에마, 개기아, 누오바 시모넬리, 사에코 등 다양한 브랜드와 함께 사용할 수 있습니다.
€3.46
Quick-view

Bezzera filterholder gasket 72x55.5x9.3mm original

the portafilter gasket on this page is a OEM/Original Bezzera spare part. The Bezzera spare part reference for this item is 7493008. This item is dimension wise and optically the same as the portafilter gasket as in the accessory tab below. But what is the difference. This gasket has a shore number of 90 and the other gasket has a shore number of 75. The...
€8.61
Quick-view

Bezzera spring 11,7x16mm

The conical compression spring on this page is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5471532. This spring is used in combination with the steam and water tubes. This stainless-steel compression spring is at the bottom 9,5mm and at the top 11,7mm. The length of this compression spring is 17mm. This compression...
€4.54
Quick-view

Bezzera conical ptfe seal 12x5x6mm

The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and the...
€6.28
Quick-view

Bezzera bipolar switch 16A 250V

The switch on this page is used in the Bezzera B6000 espresso machine. The Bezzera part reference for this item is 7633331. This switch has been rated up to 16A at 250V. The switch uses a mounting hole of 21x17mm. The push button itself is 17x13mm. The switch has been made in Italy.
€8.96
Quick-view

Boiler safety thermostat 130°C

On this page you will find a boiler contact thermostat. This boiler contact thermostat is suitable for a variety of brands like Bezzera, la Marzocco and Vibiemme. But what does a boiler contact thermostat do. Well a contact thermostat is fitted against the object with it’s metal bottom side. When the temperature off a boiler becomes above the 130 degree...
€15.16
Quick-view

Bezzera indicator light green 230V

On this product page you will find a light green indicator wire with wiring. This indicator light can be used on a variety of Bezzera espresso machines. The Bezzera part reference for this item is 7633602.01. This light green indicator light has a wire attached to it. That wire has a overall length of 200mm. This light runs on 230V. The head has a...
€4.54
Quick-view

Bezzera indicator light orange 230V

The item on this product page is a orange indicator light. This indicator light can be used on various Bezzera espresso machine models. The Bezzera part reference numbers for this item are 7633604 and 7633604.01. This orange indicator light runs on 230V. The head has a diameter of 7mm. The hole diameter for this light needs to be 6mm. The connecting wires...
€4.54
Quick-view

Bezzera 와이어 메쉬 필터 직경 8,5x5mm 오리지널

이 와이어 필터는 다양한 Bezzera 에스프레소 머신, 주로 가정용 모델의 물 주입 시스템에 사용됩니다. 이 품목은 OEM/오리지널 Bezzera 예비 부품이며 부품 참조 번호는 5471019입니다 이 와이어 메쉬는 스테인리스 스틸 304로 제작되었습니다. 외경은 8,5mm이고 두께는 5mm입니다. 이 필터는 이탈리아에서 제조되었습니다. 이 와이어 메쉬 필터는 B2013, BZ10, Ebbis, Matrix 및 Bezzera Mitica 과 같은 Bezzera 모델에 사용할 수 있습니다.
€2.01
Quick-view

Bezzera 3L 물 탱크 오리지널

대부분의 가정용 에스프레소 머신( Bezzera )에는 내부 물 탱크가 있습니다. 이 물탱크를 교체해야 하는 경우가 있습니다. 이 페이지의 물 탱크는 OEM/정품 Bezzera 예비 부품이며 이 품목의 Bezzera 부품 참조는 다음과 같습니다 7373009.01. 이 물탱크에는 약 3L의 담수를 담을 수 있으며, 내부에는 호스 연결부가 없으며 호스로 물탱크에서 물을 펌핑하는 것을 볼 수 있습니다. 이 제품은 이탈리아에서 제조되었습니다. 이 물탱크는 BZ07, BZ10, BZ13 및 Bezzera Unica와 같은 다양한 Bezzera 에스프레소 머신에 사용할 수 있습니다. 부품 참조 번호가 사용 중인 에스프레소 머신의 물...
€37.13
Quick-view

La Spaziale Gicar flowmeter T.E.A.

The flowmeter on this product page can be used on various La Spaziale espresso machine models. The La Spaziale part reference number for this item is 02498. The Gicar part reference numbers are 9.0.75.96G and 9.0.75.98G. The threads used on the in and outlet of this flowmeter are both female 1/4” BSP-G threads. The nozzle inside the valve has a diameter...
€73.77
Quick-view

Bezzera 스위치 SSR 7635424.01

The item on this product page is a Solid State Relay (SSR) which can be used on variety of Bezzera espresso machines.  The part reference number for this item is 7635424.01 This SSR uses DC and AC power. The input side is 4-32V DC, and the load side can hold up to 25A at 250V. Seen the input side is DC you need to make sure that you have the polarity...
€67.62
Quick-view

Knob M8x1,25mm

This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg. This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy. You can use this...
€9.43
Quick-view

Wera 샤워 스크린 드라이버 philips

양조 그룹에 있는 샤워 스크린이 나사로 붙어 있는 에스프레소 기계에 확실히 일반적입니다. 문제는 양조 그룹과 드립 트레이 사이의 공간은 일반적으로 정상적인 스크루 드라이버를 위해 너무 작습니다. 그래서 우리는 Wera 짧은 버전 screwdrivers가 있습니다. 이 특정한 모형은 필립스 머리와 조화하여 사용하기에 적당합니다. pH2 모델입니다. 이 특정한 모형은 독일 회사 Wera에 의해 하고, ph2 나사에 진짜로 단단한 적합이 있습니다. 많은 에스프레소 기계 상표 사용 필립스 유형 나사와 같은 La Cimbali, Casadio, Gaggia, Brasilia, Astoria, Bezzera. ·. 또한 같은 브랜드 San...
€12.87
Quick-view

Bezzera heating element 1200W 110/120V

On this product page you will find a bit more oddly shaped heating element. This heating element can be used on various Bezzera single group espresso machines. The Bezzera part reference for this heating element is 5721128 This heating element produces 1200W at 110/120V. there are 2 connecting poles. The immersed depth of the heating element is 46mm....
€82.92
Quick-view

Bezzera 브루잉 그룹 개스킷 75x47x1,5mm 오리지널

이 추출 그룹 개스킷은 에스프레소 머신의 추출 그룹과 프레임 사이에 사용됩니다. 이 개스킷은 물을 차단하기 위한 것이 아니라 추출 그룹과 프레임이 접촉하지 않도록 하기 위한 것입니다. 이 개스킷은 OEM/정품 Bezzera 예비 부품이며 부품 참조 번호는 7493013입니다. 이 플랫 개스킷의 길이는 75mm, 너비는 47mm입니다. 두께는 1,5mm입니다. 이 개스킷은 이탈리아에서 제조되었습니다. 이 유형의 개스킷은 Bezzera BZ07, BZ10 및 Bezzera Galatea 과 같은 다양한 Bezzera 모델에 사용할 수 있습니다.
€3.05
Quick-view

Olab 솔레노이드 밸브 2방향 1/8" 230V

이 솔레노이드 밸브는 Olab 회사에서 제조합니다. 이 특정 밸브는 물의 흐름을 제어하는 데 사용되는 양방향 밸브입니다. 이 특정 모델은 다양한 Bezzera 에스프레소 머신에 사용할 수 있습니다. 이 밸브는 Bezzera 부품 참조 번호 7702322 및 7702322.01. 이 밸브는 Olab K08198-B-B와호환됩니다 이 솔레노이드 밸브는 입구와 출구 쪽에 1/8" 암나사가 있습니다. 사용되는 코일은 50/60Hz에서 작동하는 220/230V 모델입니다. 밸브에는 직경 1,5mm의 오리피스가 있으며 FKM 씰로 밀봉되어 있습니다. 이 밸브는 BZ02, BZ10, BZ40, 갈라테아 도무스, 마기카와 같은...
€92.70
Quick-view

ODE 솔레노이드 밸브 3방향 1/8" 230V 5W

이 페이지에 있는 제품은 이탈리아 브랜드 ODE에서 만든 3방향 솔레노이드 밸브입니다. 이 밸브는 다양한 가정용 Bezzera 에스프레소 머신에 사용할 수 있습니다. Bezzera 부품 참조 7702305 및 7702316과호환됩니다 . 이 3방향 솔레노이드 밸브에는 1/8" BSP-G 나사산이 있는 암 입구와 출구가 있습니다. 코일은 5W 230V 모델입니다. 출구 쪽의 나사산은 1/8" 나사산입니다. 밸브의 오리피스는 직경이 1,2mm이며 FKM 씰로 밀봉되어 있습니다. 이 솔레노이드 밸브는 BZ02, BZ10, BZ35 및 Bezzera Galatea 과 같은 다양한 Bezzera 모델에 사용할 수 있습니다. 전체 목록은...
€47.97
Quick-view

Bezzera 포타필터 개스킷 73x57x7,5mm

이 포터필터 개스킷은 두께가 7,5mm에 불과한 얇은 포터필터 개스킷 중 하나입니다. 이 개스킷은 Bezzera 부품 참조 번호 7493019와호환됩니다 이 개스킷의 외경은 73mm, 내경은 57mm, 두께는 7,5mm입니다. 이 개스킷은 이탈리아에서 제작되었습니다. 이 개스킷은 예를 들어 Bezzera BZ10 에스프레소 머신에 사용할 수 있습니다
€5.29
Quick-view

Bezzera 포타필터 개스킷 실리콘 73x57x7,5mm 오리지널

이 페이지의 개스킷은 다양한 Bezzera 에스프레소 머신(주로 가정용)에 사용되는 실리콘 포터필터 개스킷입니다. 이 특정 개스킷 모델은 OEM/순정 예비 부품이며 Bezzera 부품 참조 번호는 7493022입니다. 개스킷의 외경은 73mm, 내경은 57mm, 두께는 7,5mm입니다. 3개의 내부 슬롯이 있습니다. 이 포터필터 개스킷은 BZ07, BZ10, BZ16 및 Bezzera Strega와 같은 Bezzera 모델에 사용할 수 있습니다.
€10.71
Quick-view

Bezzera solenoid valve drain fitting

The item on this page is a Bezzera solenoid valve discharge fitting and tube. This spare part is a OEM/original Bezzera spare part and has the part reference numbers 5194559, 5194559LL, 5194560LL and 5370313.  The fitting is screwed on the bottom of the solenoid valve where the exhaust port is located. The threads are a female 1/8”. Over the fitting you...
€9.20
Quick-view

Bezzera dosing device 30uZ 3L S.T. 230Vac

On this product page you will find a dosing device suitable for various Bezzera espresso machines. The Bezzera part references for this item are 7662651.01 and 7662616. The Gicar code for this item are 9.5.17.73 and 9.5.17.73G This dosing device can be used on the Bezzera BZ07, Bezzera BZ13, Bezzera BZ35 and Bezzera BZ40. This device is only...
€298.52
Quick-view

Bezzera lever microswitch

The microswitch on this page is a model which is used with various Bezzera espresso machines. The Bezzera part reference for this item is 7633907 This microswitch has a small roller, instead of just a push button. The maximum amp rating for switch is 16A a t 250V. This switch has been made in Italy. You can find this switch on the Bezzera BZ07, Bezzera...
€33.86
Quick-view

Bezzera BZ07/BZ10 Pressure switch kit 230V

The item on this page is a OEM/Original Bezzera electronic kit for various older domestic Bezzera espresso machines. The Bezzera part reference for this item is 7433017R. This kit is made up out of 3 items, the wiring loom, the relay and the pressure switch. The Pressure switch is a Ma-ter C110P which has been set at 2,3bar and is rated up to 15A at...
€238.09
Quick-view

Bezzera Level regulator 1 probe 220/240V

The level regulator on this product page is a OEM/Original Bezzera spare part and used on various models. The Bezzera part reference number for this item is 7661036.01PR. This unit runs on 220-240V AC and is suitable for 1 temperature probe. This unit is made in Italy. You can use this original Bezzera level regulator on the Bezzera BZ07, Bezzera BZ10,...
€168.27
Quick-view

Bezzera steam water valve pin

This stainless steel pin is a OEM/Original Bezzera spare part. This pin transfers on the steam and water valve a vertical motion to a horizontal motion. This pin has the Bezzera part reference 5225610. This stainless steel pin has a overall length of 33,6mm. The head has a diameter of 14mm and the thread used is a male M8. You can use this stainless...
€19.03
Quick-view

Bezzera steam water shaft 12x47mm

This steam and water valve shaft pin is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5260204DL. This stainless-steel steam and water tap pin has a overall length of 47,5mm. The head of this shaft has a outer diameter of 12mm and a height of 5mm. At the other side of the shaft is a male M4 thread. This valve shaft can be...
€31.24
Quick-view

Bezzera 양조 그룹 발열체 100W 230V 오리지널

이 페이지의 발열체는 표준 보일러 발열체와 약간 다릅니다. 이 특정 모델은 추출 그룹을 특정 온도로 유지하는 데 사용됩니다. 따라서 추출 그룹에 흐르는 물의 온도 안정성이 향상됩니다. 이 품목은 OEM/순정 예비 부품이며 Bezzera 부품 참조 번호는 5963182.01. 이 발열체는 230V에서 100W를 생산합니다 이 발열체는 Bezzera 의 다양한 가정용 및 상업용 에스프레소 머신(예: Bezzera BZ10, BZ16, Eclisse 및 Bezzera Strega)에 사용할 수 있습니다.
€87.00
Quick-view

Bezzera 물 탱크 커버 오리지널

에스프레소 머신 뒷면의 물 탱크는 작은 스테인리스 강판으로 덮여 있습니다. 이 품목은OEM/정품 Bezzera 예비 부품이며, 이 품목의 부품 참조 번호는 5073020LW입니다 이 플레이트는 스테인리스 스틸로 만들어졌으며 너비는 106mm, 길이는 243mm입니다. 이 품목은 BZ07, BZ09, BZ10, BZ13 및 Unica와 같은 다양한 Bezzera 모델에서 사용할 수 있습니다.
€29.27
Quick-view

Bezzera 물 탱크 흡입 라인 필터

Bezzera 에스프레소 머신의 물 탱크에 이물질이 있을 가능성은 항상 존재합니다. 하지만 이물질이 에스프레소 머신의 유압 시스템으로 들어가는 것은 원치 않으실 겁니다. 이런 이유로 철망 필터를 사용할 수 있습니다. 이 정수 필터는 OEM/정품 Bezzera 예비 부품이며 부품 참조 번호는 7374015입니다. 이 정수 필터의 양쪽에는 부드러운 실리콘 호스를 부착할 수 있습니다. 튜브의 내경은 약 5-6mm여야 합니다. 필터 내부의 필터 멤브레인은 200미크론 메시입니다. 이 필터는 이탈리아에서 제조되었습니다. 이 필터는 물 탱크를 사용하는 다양한 Bezzera 에스프레소 머신(예: BZ07, BZ10, BZ13 및...
€3.58
Quick-view

Bezzera 보호 커버 스위치

이 스위치는 다양한 Bezzera 에스프레소 머신에 사용되는 로커 스위치에 사용할 수 있습니다. 이 너트는 스위치의 나사산에 나사로 고정할 수 있습니다. 이 스위치 커버는 OEM/정품 Bezzera 예비 부품이며 부품 참조는 7372507입니다. 이 부품은 두 부분으로 구성되어 있습니다. 움직이는 고무 플렉시블 부분과 니켈 도금 너트입니다. 이 품목은 이탈리아에서 제조되었습니다. 이 스위치 프로텍터는 BZ13, BZ07, Mitica 및 Matrix와 같은 에스프레소 머신에 사용할 수 있습니다
€7.05
Quick-view

Bezzera BZ07/BZ10/BZ13 보일러 오리지널

이 제품 페이지의 보일러는 다양한 Bezzera 에스프레소 머신에 사용됩니다. 이 보일러는 OEM/정품 Bezzera 예비 부품이며 부품 참조 번호는 5320520BL-AL입니다. 이 특정 보일러는 Bezzera BZ07, BZ10, BZ13 및 크레마에 사용됩니다. 부품 참조 번호가 보일러와 일치하는지 확인하세요.
€308.92
Quick-view

Bezzera BZ07 모델

모델 Bezzera BZ07 은 다음 버전에서 사용할 수 있습니다:

  • Bezzera BZ07 PM
  • Bezzera BZ07 PM PID
  • Bezzera BZ07 DE
  • Bezzera BZ07 DE PID

Bezzera BZ07 PM & BZ07 DE

Bezzera BZ07 PM은 머신의 기본 수동 버전으로, 수동으로 추출을 시작하고 중지하여 추출 과정을 제어할 수 있습니다. 이 모델은 추출 과정을 직접 제어하는 것을 선호하는 홈 바리스타에게 이상적입니다.

반면, Bezzera BZ07 DE는 사용자가 각 샷에 사용되는 물의 양을 미리 설정하고 자동으로 제어할 수 있는 부피 측정 버전입니다. 따라서 추출 과정이 보다 일관되고 효율적이어서 편리함과 정밀함을 원하는 분들에게 이상적입니다.

PID 버전

PM과 DE 모델 모두 Bezzera BZ07PID 온도 제어 기능을 사용할 수 있습니다. PID 버전은 기존의 압력 스위치 대신 온도 프로브를 사용하여 추출 온도를 더욱 정밀하게 제어할 수 있습니다. 이 기능은 최적의 에스프레소 추출을 위한 안정적인 온도를 보장합니다.

물 공급 옵션: R 버전과 S 버전

Bezzera BZ07 는 R 버전과 S 버전으로도 제공됩니다:

  • R 버전은 주 급수관에 직접 연결되어 있어 탱크를 다시 채울 필요 없이 지속적으로 물을 공급할 수 있습니다.
  • S 버전은 기기 후면에 3리터 물 탱크가 있어 직접 급수관을 사용할 수 없는 환경에 이상적입니다.

보일러 및 발열체

Bezzera BZ07 에는 1.5리터 보일러와 1200W 발열체가 장착되어 있어 사용 중 안정적인 스팀과 물 온도를 유지하기에 충분한 전력을 제공합니다. 110/120V220/240V 구성으로 제공되므로 다양한 지역에서 사용하기에 적합합니다.

결론

Bezzera BZ07 에스프레소 머신은 수동에서 용적 주입, 전통적인 압력 제어, PID 온도 제어에 이르기까지 홈 바리스타를 위한 다양한 옵션을 제공합니다. 직접 급수관 연결용 R 버전이든 탱크가 있는 S 버전이든 이 머신은 안정적인 성능을 제공합니다. Brooks Parts 은 다양한 예비 부품을 제공하여 최상의 Bezzera BZ07 최상의 상태로 작동하도록 보장합니다.