레벨 프로브
레벨 프로브
상품이 20개 있습니다.이 제품 페이지에서 에스프레소 머신 레벨 프로브의 다양한 선택을 찾을 수 있습니다. 수평 조사는 보일러의 정상에 또는 플랜지에 있는 지팡이이고 보일러 안쪽에 물이 조사를 타격하는 경우에 검출합니다.
물이 조사를 명중하지 않을 때 물 인레트 벨브는 열리고 펌프는 실행하기 시작합니다 (모든 상표 및 모형에 아닙니다). 물이 수평 프로브 밸브가 닫히고 펌프는 중지합니다. 레벨 프로브는 레벨 레귤레이터 및 도킹 장치와 함께 사용됩니다.
다양한 종류의 레벨 프로브가 있습니다. 가장 중요한 것은 조사 지팡이입니다, 이 조사 지팡이는 스테인리스에게서 하고 연결관을 위한 편평한 반점이 있습니다. PTFE 슬리브에 사용되는 물개. 이음쇠는 안과 외부입니다. 안은 조정 위치에 조사 지팡이를 고치기 위하여 이용되고 보일러에 있는 임명을 위한 외부.
수준 조사는 많은 길이에서, 155mm까지 80mm에서 려고 찾아낼 수 있습니다. 그들 중 일부는 인스턴스 La Cimbali로 곡선됩니다. 주요 실 유형은 1⁄4" BSP-G입니다. 그러나 La Cimbali 사용으로 상표 1/8" BSP-G.There는 미터 M을 사용하는 1개의 상표, Bezzera입니다10x1 스레드.
La San Marco level probe
(0) The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of CCMMIN0030 and 202237. This level probe is installed in the boiler flange of various La San Marco espressomachines. Seen the location it isn’t straight, but slightly bent. The probe itself has been made from stainless steel. The...
La Cimbali level probe 1/8 90mm
(0) On this product page you will find a level probe for various La Cimbali and Faema espresso machine models. The level probes used on La Cimbali espresso machine boilers are different then most. The Cimbali part number for this item is 913-786-010 and for Faema the part number is 913786010. The level probe itself has a male fitting of 1/8”...
Cimbali water level probe 1/8"M 108mm
(0) The level probe on this page is used on various La Cimbali espresso machine models. This level probe is used the flange of the boiler instead on the top of the boiler. The part references can be found in the extra info tab. The level probe itself has been made from stainless steel. There is a PTFE insulator and a brass boiler fitting. This is a male...
Bezzera Level probe m10-90mm
(0) The level probe on this page is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5973012. This level probe has a stainless-steel probe and a PTFE insulator. The male thread used is a M10 thread. The overall length of this level probe is 90mm. You can use this level probe on the Bezzera B2000, Bezzera B2006, Bezzera B3000,...
Bezzera level probe M10-155mm
(0) The level probe on this page is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5973013. This level probe has a stainless-steel probe and a PTFE insulator. The male thread used is a M10 thread. The overall length of this level probe is 155mm. You can use this level probe on the Bezzera B2000, Bezzera B2006, Bezzera B3000,...
Rancilio level probe 1/8" BSP-G 115mm
(0) The level probe on this product page is mainly used on Rancilio espresso machine boilers. The Rancilio part references for this item are 25110005, 34200086 and 34200088. This level probe has been manufactured by the Italian company Gicar, the part reference is 9.0.83.98G This level probe has a brass fitting, which has a male 1/8” BSP-G thread....
level probe 1/4" bsp-g 120mm
(0) the item on this product page is a boiler level probe. A level probe is used to measure the amount of water inside the boiler. This specific model of level probe can be used on various espresso machine brands such as San Remo, ECM Heidelberg, Quality espresso and Conti. The San Remo part reference number for this item is 10112064 This level probe...
La San Marco level probe 3/8" L 142mm
(0) The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of 202209, 400124, BVASS2000 and CCMMIN0020 This level probe is installed in the top of the boiler of various La San Marco espressomachines, with a slightly bend probe. The probe itself has been made from stainless steel. The...
Level probe 1/4"M 148mm 90 degree angle
(0) The level probe on this page is used on various espresso machine such as Fiorenzato and Grimac espresso machine boilers. The Grimac part reference is 1250400006-GR212B and the Fiorenzato reference is A1400001. The level probe has been made from a stainless-steel probe, which has been bend to a 90 degree angle. To insulate this probe there is a PTFE sheet...
Level probe 1/4" 100mm
(0) The level probe on this page is used with various Rocket and Lelit espresso machines. The Rocket part reference for this item is A199905078 and for Lelit MC715. The level probe has been made from a stainless-steel probe. To insulate this probe there is a PTFE sheet around it. The level probe has a male ¼” BSP-G thread. The overall length of...
Level probe 1/4" 112mm
(0) The level probe on this product page is used on various espresso machine boilers of the La Cimbali Group. You can find this level probe on various espresso machine boilers of Casadio, Faema and La Cimbali espresso machines. The Faema part reference for this item is 915789000, the Casadio reference is 915789000 and the Cimbali part references are...
Level probe 125mm 1/4"
(0) The level probe on this page is used with a variety of espresso machine brands. Such as Brasilia, Gaggia and La Pavoni. The Brasilia part reference for this item is 00649.4.00.08, the Gaggia part reference is WGADM1935 and the La Pavoni part reference is 438023. This stainless-steel level probe has a PTFE insulator. The inner fitting is a 1/8”...
La Cimbali magnetic level microswitch
(0) This magnetic level microswitch is used on various older la Cimbali espresso machines, which don´t use a level probe. The La Cimbali part references for this item are 464922002, 464-922-002 and 464-922-010. This level assembly comes with the microswitch, magnet, level float and the gasket. This magnetic level senso can be used on various...
