Vibiemme Domobar Super HX boiler

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

The item on this product page is a level probe which can be used on a variety of Vibiemme espresso machines. The Vibiemme part refence number for this item is ELETSON. This level probe has a male ¼” fitting and a overall length of 140mm. This level probe has a 90 degree angle at the connector. This level probe can be used on a variety of Vibiemme espresso...

On this product page you will find a boiler pressure gauge suitable for the Vibiemme Domobar Super. This manometer has the Vibiemme part reference MANMSEM. The manometer is a boiler pressure manometer with a reach from 0 to 2,5bar.  The body of this manometer has a outer diameter of 41mm and a rim diameter of 50mm. On the back is a copper tube with...

The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...

The pressure switch on this product page is made by the Italian company Ma-Ter. This company produces a variety of pressure switches.  This pressure switch is mainly used on Vibiemme espresso machines. The Mater part reference number for this item is XP742C410015. The Vibiemme part reference number for this item is ELETPREDSUKIR  This pressure...

On this product page you can find a pump pressure gauge suitable for various Vibiemme espresso machine models. The reference item number of Vibiemme is MANMDOE40016 . This manometer has a shiny chrome looking rind which has a outer diameter of 47mm, the body of this manometer is 40mm. The scale of the boiler pressure gauge goes from 0 to 16 bar pump...

On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...

On this page you will find a flat silicone gasket. This silicone gasket is 10x5mm.  It is being used in 2 applications with Vibiemme ( GUARSILRUDOSU ) espresso machines. The first is in the steam and water valve of the Vibiemme Domobar and in the expansion valve used in the Domobar super. If you are not sure if this silicone blind gasket is suitable for...

The solenoid valve on this product page is one made by the Italian company ODE. This solenoid valve can be used on various Vibiemme (VBM) water inlet valves. The Vibiemme part reference number is ELETELE2VAU22. This Solenoid valve is a 2 way valve. Both the in and outlet side have a 1/8” BSP-G thread. The diameter of the orifice is 1,5mm. The seal...