مصنف بواسطة
Price
Manufacturers
اكتب الجزء
more... less
يكتب
Filter

San Remo

صانع آلة إكسبريسو سان ريمو ليس من أقدم مصنعي آلات إكسبريسو، لكنهم اكتسبوا سمعتهم بسرعة كبيرة على مر السنين مع مجموعة متنوعة من آلات إكسبريسو والطواحين.

يمكن أن تتراوح ماكينات الإكسبريسو التي تصنعها سان ريمو في تريفيزو إيطاليا من ماكينات الإكسبريسو الأكثر أساسية إلى البارستا الذي يريد أعلى ماكينات الإكسبريسو. آلات القهوة التي تصنعها سان ريمو مصممة في المقام الأول للسوق التجارية، لكنها لديها أيضا آلات إكسبريسو محلية.

إنهم يصنعون مجموعة متنوعة من آلات إكسبريسو ، في الأساس جميعها آلات إكسبريسو تعمل بالفولين (باستثناء نموذج الرافعة). يستخدمون مجموعة متنوعة من مجموعات البيرة، بدءا من أسلوب e61 ومجموعات البيرة الحلقية طوال الطريق حتى إصداراتهم الخاصة المستخدمة على نماذج مثل أوبرا سان ريمو San Remo (كافيه راسر).

San Remo أجزاء إسبريسو والقهوة والطاحونات

Portafilter gasket 72,7x57x8mm orange silicone

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema...
4.50 €

P303/T01 3 المرحلة 20A

The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover. This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in...
94.94 €

حشية عامل التصفية 73x57x8mm

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...
4.94 €

نظام تنظيم مستوى السيارة NRL30/1E/2C/F 115V

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.70G. Note: this is the 115V version and not the 230V version This Gicar level regulator has the name NRL30/1E-2C/F and runs on 115Vac. You can find this level regulator on various espresso machines such as the...
73.71 €

تجميع صمام الصرف

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
7.17 €

مفك براغي شاشة دش Wera مشقوق

في بعض الحالات ، يتم ربط شاشة الاستحمام بمسمار ، في معظم الحالات يكون هذا مسمار فيليبس أو مسمار مقفل. من الصعب إزالته بمفك عادي بسبب الارتفاع المحدود تحت مجموعة الشرب. ولكن من أجل ذلك تحتاج إلى مفك المسامير المختصرة، في هذه الحالة من العلامة التجارية الألمانية Wera، والتي تناسب بشكل جيد تحت مجموعة البيرة بحيث يكون من السهل فك المسامير وأنها لا تنزلق. مفك...
11.50 €

ربيع صمام البخار والماء 10,5x32ملم

This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
1.10 €

صمام الأمان 3/8" 1.8بار CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
10.58 €

Cafelat السيليكون الأزرق portafilter غطاء 73x57x8,5 ملم

هذا الحجم portafilter الصمغ هو الأكثر شيوعا portafilter ستجد الصمغ. هذا الحجم يمكن استخدامه على نمط e61 من مجموعات البيرة. يمكنك استخدامها على علامات تجارية مثل Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket وهكذا. هذا الصمغ مصنوع من قبل شركة مقرها هونغ كونغ Cafelat. هذا الصمغ مصنوع من السيليكون الأزرق. القطر الخارجي هو 73mm، والقطر الداخلي هو...
4.36 €

E61 حامل الربيع

The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
4.10 €

Below we will give a small overview of various models Sanremo has made over the years, with a bit of technical info about the espresso machines themselves. At Brooks-Parts we do sell a variety of spare parts for SanRemo espresso machines, this can be OEM/original spare parts or and after market ones.

The SanRemo Zoe

This model of Sanremo is one of the economic models SanRemo produces. The SanRemo Zoe is available in a 1,2,3 and a compact model. The machine itself is a single boiler heat exchanger(HX) espresso machine. The brewing group used on the Zoe is a ring brewing group, to control the dosing on this espresso machine you just need to push one of the push buttons. With this you can select various coffee types.

The SanRemo Verona

This SanRemo Verona model is one of the older models made by SanRemo, which isn’t a bad thing at all. The SanRemo Verona espresso machine comes in various boiler configurations. Seen there is a single HX model, but there is also a model the TCS which has a HX boiler and individual brewing group boilers. The brewing groups used on the San Remo Verona are e61 style of brewing groups, they are solenoid operated.

But you do also have the SanRemo Verona RS, this espresso machine does look identical to the regular SanRemo Verona but isn’t. This espresso machine is a multi boiler espresso machine, where every brewing group has a deciated boiler. This espresso machine is available in a 2 and a 3 group version

SanRemo Café Racer

One of the more high end espresso machines around is the San Remo Café Racer. This espresso machine is also a multi boiler system with thermal PID control. So each brewing group has a dedicated boiler. The boiler used on the Café Racer is one of the own design of San Rem, what makes this brewing group unique is that it is made from stainless steel. This is quite uncommon, seen most brewing groups are made from brass. On top of these brewing groups you will find a display and the coffee selection buttons.

A other thing which makes the open frame structure. Next to this open frame structure you can customize this espresso machine, such as wooden panels and a variety of paint colours.