Vibiemme heating element 1600W 230V
search
  • Vibiemme heating element 1600W 250V
  • Vibiemme heating element 1600W 230V

عنصر تدفئة الفيبيوم 1600W 230V

56.94 €
شامل للضريبة

47.06 € بدون ضرائب.

الكمية
Shipment after 4 - 8 working days

compare
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

On this page you will find a heating element suitable for the Vibiemme Domobar Junior (part number: ELETRESD1625). This element has a brass flange and a copper element. The element itself has a wattage of 1600W with a voltage of 230V. The immersed length of the element is 95mm. The flange has a OD of 1” ¼” . The element connection has 2 poles, these 2 poles have 90 degree spade connectors. The element gasket used for this element is 53x43x3mm or 53x42x3mm.

Are you not entirely sure if your heating element is the same? The handiest is then that you take out your original element and measure it and compare the data of the original one from your machine.

Vibiemme
13-129-L-1755285

البيانات

الجهد االكهربى
230V
رقم القطعة
Vibiemme ELETRESD1625
طول مغمور
95mm
ماركة
Vibiemme
واط
1600W
Which heating element thermostat do I need for my heating element? insert_link

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

What is important choosing the right heating element for my coffee machine? insert_link

حسنًا، أولًا وقبل كل شيء شفة عنصر التسخين، حيث لا يمكن تبديلها مع بعضها البعض في معظم الحالات، حيث أن عنصر التسخين Cimbali لن يتناسب مع عنصر التسخين Nuova Simonelli بسبب طراز الشفة. الميزة المهمة الأخرى هي طول عنصر التسخين. عندما يكون طويلًا جدًا، لن يتناسب. عندما يكون العنصر قصيرًا جدًا ستحصل على توزيع غير متساوٍ للحرارة في الغلاية.

How do I descale a heating element? insert_link

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

Do all the heating elements come with a heating element gasket? insert_link

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

التعليقات (0)
لا يوجد تعليقات عملاء هذه اللحظه.

8 غيرها من المنتجات