Vibiemme heating element 1600W 230V
search
  • Vibiemme heating element 1600W 250V
  • Vibiemme heating element 1600W 230V

Vibiemme heating element 1600W 230V


€47.06

€47.06 tax excl.

qty
Shipment after 4 - 8 working days

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

On this page you will find a heating element suitable for the Vibiemme Domobar Junior (part number: ELETRESD1625). This element has a brass flange and a copper element. The element itself has a wattage of 1600W with a voltage of 230V. The immersed length of the element is 95mm. The flange has a OD of 1” ¼” . The element connection has 2 poles, these 2 poles have 90 degree spade connectors. The element gasket used for this element is 53x43x3mm or 53x42x3mm.

Are you not entirely sure if your heating element is the same? The handiest is then that you take out your original element and measure it and compare the data of the original one from your machine.

Vibiemme
13-129-L-1755285

Data sheet

Brand
Vibiemme
part number
Vibiemme ELETRESD1625
Submerged length
95mm
Voltage
230V
Watt
1600W

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product