Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
L'élément de chauffage sur cette page est adapté à divers Gaggia 3 machines espresso de groupe. Tels que Gaggia E90 et D90.
Cet élément de chauffage produit 5000W à 220/400V et a 6 des terminaux de connexion. La longueur immergée de l'élément est de 450mm. La bride a un diamètre de 75/53mm et la distance entre les trous est de 43mm.
Le joint de chauffage utilisé sur cet élément est un joint plat PTFE qui a un diamètre extérieur de 50mm un diamètre intérieur de 40mm et une épaisseur de 2mm.
Data sheet
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
