La San Marco élément de chauffage 4000W 230V
12-884-L-1755105
>219,86 € VAT incl.181,70 € without VAT
tax incl.
Specifications
Sur cette page vous trouverez un OEM/original La San Marco élément de chauffage. Cet élément de chauffage convient à une machine à expresso de 3 groupes. The San Marco partie référence pour ce point 108462
L'élément produit 4000W à 230V et possède 4 pôles de raccordement. La longueur immergée de l'élément de chauffage est de 550mm. La bride est triangulaire 82x82mm et la distance entre les trous est de 61mm.
Le joint de chauffage que vous pouvez utiliser pour cela a un diamètre extérieur de 56mm un diamètre intérieur de 47mm et une épaisseur de 3mm.
Ce OEM San Marco élément de chauffage peut être utilisé sur les modèles de machines expresso La San Marco 100, La San Marco 85 and the La San Marco 95.
Extra Info
| Longitud submergida | 550mm |
| Voltatge | 220V |
| Watt | 4000W |
| Tipus part | Heating element |
| Marca | La San Marco |
| número de peça | San Marco 108462 |
| Tipus | Original |
Reviews (0)
No customer reviews for the moment.
Frequently Asked Questions
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
Other Products
