Astoria Argenta
The item on this product page is a OEM/Original Astoria CMA spare part. This item is used with Astoria and Wega espresso machines. The part reference for this item is for Astoria 25615 and for Wega W10546 and WY25615.
This item has been machined from brass and it is made to hold the flat sealing gasket.
You can use this inlet gasket...
€8.91
Astoria/Wega water level nut 1/2" 12mm
This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383
This sight glass nut...
€6.68
Ode solenoid valve 3 ways base mounting 220/230V 50/60Hz 15bar
Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV
This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
€67.63
Solenoid valve connector
Solenoid valve connector.
Suitable for:
CodeProducer
18110
Astoria CMA
A10113
Astra
000564
Aurora-brugnetti
7631504
Bezzera
00697.4.00.08
Brasilia
7000/C
Olab
9007775
Reneka
€2.77
Astoria Wega portafilter gasket 8mm
Astoria Wega portafilter gasket 8mm 72x56mmSuitable for:
Astoria Argenta
Astoria Brava
Astoria CK-CKX
Astoria Divina
Astoria Dora
Astoria Lisa
Astoria Planet
Astoria Pratic
Astoria Rapallo
Astoria Sibilia
Wega Venus
Wega Concept 56mm
€2.92
Procon clamp ring pump 180 L/H
The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B
The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€179.36
Adapter kit for motor to clasp pump
The product on this page is a set of individual components which are used for coupling a espresso machine pump to a motor. This specific model is a OEM/Original Astoria CMA part. The Astoria part number for this item is 83260016R and the Wega part number is WY83260016R
This set consists of a stainless steel motor to pump coupling. A shaft...
€26.30
Spring 14x45mm
The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451.
This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm.
You can use...
€2.07
Lower water level fitting
The item on this page is a lower water level fitting for the Astoria and Wega espresso machines. This item is OEM/Original spare part. The Astoria part number for this item is 53001 and the Wega part number is WY53001
This lower water level fitting has been casted out of brass and is machined afterwards. The fitting which is used to...
€36.74
O ring gasket 6x1.2mm
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013.
This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10
Level indicator red ball 5,8mm
This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls.
This red ball has a diameter of 5,8mm and is made in Italy.
This type of level indicator can be found...
€1.74