Astoria Argenta
Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
€83.48
Astoria/Wega brass nut M3
The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050.
This brass nut has a metric female thread of M3. The nut has made according to specifications of...
€0.68
Brewing group plug
On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups.
Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines.
If you are not entirely sure if this...
€15.97
Astoria Wega valve nut
This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461
You can find this item basically on every model like the Astoria...
€4.38
Astoria Wega shower holder
The shower holder diffuser on this page is used for a couple of models produced by the Astoria CMA group. For the Astoria you can find this item on the Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa and Astoria Pratic. For the Wega espresso machines you can find them on the Wega Venere and the Wega Concept 56.
This item...
€36.74
Astoria Wega heating element 1 gr 2000W 110V
The espresso machine heating element on this page is a used in various espresso machine models made by the Astoria CMA corporation. This heating element is mainly used on 1 group espresso machines. The Astoria part number for this item is 17001 and the Wega part number for this item is WY17001
This heating element produces 2000W at 110V. You can...
€77.59
Nipple 1/4"M x 3/8"M
The item on this product page is a brass fitting. This fitting has on 1 side a male thread of ¼” BSP-G and on the other side a male thread of 3/8”BSP-G.This brass fitting has been made in Italy.
This type of fitting can be found with various espresso machine brands such as Astoria, Grimac, La Carimali, La Spaziale, Nuova Simonelli, La...
€2.77
Brass half nut 3/8" 21x6mm
Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21.
Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...
€1.62
Astoria sight glass 11x170mm
On this page you will find a sight glass for various Astoria and Wega espresso machines. The Astoria part number for this sight glass is 21300 and the Wega part number is WY21300.
The sight glass has a outer diameter of 11mm and a overall length of 170mm. This sight glass doesn’t have any reference lines.
This sight glass of 11x170mm can be used...
€4.16
T fitting brass 1/4" MMM
The item on this fitting page is a 3 way T fitting. This fitting has on each side a ¼”male fitting, made in Italy.
This T fitting has a nickel finish on it, it is possible that you get one without the nickel finish.
On each side the thread used is a ¼”BSP-G fitting in the male configuration.
You can use this T fitting in...
€4.08