Brasilia Opus - Brewing group

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

ODE solenoid valve 2 way valve 230/240V 50/60Hz

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...