Cimbali M34 touchpanel 5 keys

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

On this page you will find a stainless-steel compression spring used on various Faema sight glass assemblies. This spring is used to keep a equal pressure on the sight glass gasket. The Faema part reference for this item is 4731018635. This stainless-steel compression spring has a outer diameter of 22mm and a height of 20mm. You can use this...

On this page you will find a brass washer which is suitable for the Astoria and Wega water level assembly. This washer makes sure that the gasket doesn’t tear when the sight glass nut is tightened. This washer has the Astoria reference 25652 and the Wega part is WY25652  This gasket has a outer diameter of 18mm a inner diameter of 12mm...

The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has...

The switch on this page is a switch used in a variety of Mazzer coffee grinders. The Mazzer part reference for this switch is S000INA13. This selector switch has been made by the Italian company Bremas. The Bremas part references are CA0170002 and CA0170002V. This Bremas switch is rated up to 20A at 690V. The switch has 2 positions 0 and 1. The selector...

On this page you will find a sight glass for various Astoria and Wega espresso machines. The Astoria part number for this sight glass is 21300 and the Wega part number is WY21300. The sight glass has a outer diameter of 11mm and a overall length of 170mm. This sight glass doesn’t have any reference lines. This sight glass of 11x170mm can be used...

On this page you will find a OEM/Original Astoria CMA electronic box for various models of Astoria and Wega. The Astoria code for this part is 18090048  and the Wega part number is WY18090048  The dosing control unit SB/GL “2004”PLUS1, runs on 230V at 50/60Hz. It is suitable for 1 – 3 brewing groups. This dosing device is...

This fitting is used to transition from a conical male 1/8” BSP-G fitting, to a flat 1/8” BSP-G thread. why would you do this? well capillaries have in most cases flat connections, but there are also brands which have conical capillaries. This can be found for instance on Faema and Cimbali coffee machines. This fitting is called a extended version, seen...