Faema E61 aluminium boiler ring 12 holes 246X210X10mm

The early models of Faema used a double flange system on their boilers. You would have a heating element flange and a water level flange. These flanges had a gasket to seal off the boiler. To spread the pressure equally over the gasket a inner and outer ring are placed. This ring prevents the deformation of the copper boiler flange and side flanges.

Over time you will get corrosion over time. Copper boiler, aluminium boiler rings and zinc plated M8 bolts and nuts. So, the chance that the boiler rings are broken or will break is quite common. For the inner ring you can cut a ring in half, you will still have an equal amount of pressure to seal off the boiler flange.

This boiler ring is made from casted aluminium, with 12 holes drilled in it to accept the M8 boiler bolts. The outer ring has a diameter of 248mm the inner size is 205mm and the thickness of this ring is 10,5mm.

This boiler ring is not suitable for the boilers which have 16 holes, the bolt holes would not line up.