Gasket 13x4x4mm FKM
search
  • Gasket 13x4x4mm FKM

Gasket 13x4x4mm viton


€1.18
VAT included

€0.98 tax excl.

qty

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Gasket 13x4x4 viton.

Suitable for:

CodeProducer
27421008 Astoria CMA
27421026 Astoria CMA
12005.0.00.02 Brasilia
50000020 Expobar
2151136654 Faema
4701-019545 Faema
4701019545 Faema
A1200160 Fiorenzato C.s.
01954502 Futurmat-Ariete
H.2.001 Marzocco
362027 Pavoni
36301008 Rancilio
36302002 Rancilio
109051 San Marco
GUARPI Vibiemme
GUARPIEVOREVO Vibiemme
W10343 Wega
WY27421008 Wega
WY27421026 Wega
Faema
49-028-L-1186822
29 Items

Data sheet

Brand
Faema
Rancilio
Gasket Material
FKM
Inner diameter (ID)
4mm
Outer diameter (OD)
14mm
part number
Faema 2151136654
Rancilio 36302002
Rancilio
Audrey
Betsy
Classe 10
Silvia
Silvia V1
Silvia V2
Silvia V3
Z11
Thickness
4mm
Type part
Gasket

Well that answer is pretty simple, no it isn’t. The original valve works as following, when you turn the shaft inwards the valve pin will push a gasket holder. The steam can go out, close it again and no steam can go out. In the case of the modern E61 valves is that behind the gasket holder is a small stainless steel ball with a spring.

From the beginning of the Faema E61 brewing group are basically no differences between the parts installed inside the brewing group. Parts such as the valve gaskets, springs, valve assemblies and portafilters have all remained the same. The biggest change is the small cleaning hole on the front of the brewing group. With the earliest models this hole didn´t exist.

There are 5 types of boiler used on the Faema E61 espresso machine. The most well known is the double flanged model. You have on one side the heating element flange and on the other side the water level flange, both are out of production. These are held in place with aluminium boiler rings. For the single groups you have a boiler with a flange on one side.

The next model is a stainless steel boiler, with one flange. This type of boiler is less common then the copper boiler above. There is also a later model stainless steel, which doesn’t have a removable flange. Both these boilers have corrosion issues, this has to do because of the stainless steel.

The latest model is also a copper boiler, this boiler has a single heat exchanger(HX) in the middle. Most modern espresso machines have for each individual brewing group a individual HX.

Yes it is, but this depends on various factors. The first thing is experience, seen this is a manual operated espresso machine it requires a lot more attention from the barista then a solenoid operated model. There you need to stop the brewing process manually. If you don’t have the experience you probably can’t hold up with the tempo which is required at such a bar. Then I would advice to go for the Faema E61 Jubilee, this is the solenoid operated version of the Faema E61 Legend espresso machine.

Comments (0)
No customer reviews for the moment.

Related Product

8 other product