La Scala - Brewing group

Faema E61 brass washer 5.4x3

Faema E61 group collector rod gasket holder

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

Shower with net and rays caulked

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...

The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac...

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...

Gaggia valve spring

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...