Rancilio Classe 11 display

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be...

This push button panel is used on various Nuova Simonelli espresso machine models. This item is a OEM/Original spare part and has the Nuova Simonelli part reference number 04901252 This push button panel has in total 5 buttons, 4 of them are for the pre-set volumetric settings. The middle one is the continuous and programming key. This item is made in...

The conical grinding burr set on this product page is a OEM/Original Fiorenzato coffee grinder spare part. The Fiorenzato part reference number for this item is 400000015 These grinding burrs are from the conical type. The outer diameters are 71 and 49mm. the inner diameters are 42 and 13mm. The outer grinding burr is fixed with 3 screws. The thickness...

This dosing device Dosatura 3d5 Plus 3PID 240Vac, with the Gicar code 9.5.22.37G is being used for Vibiemme espresso machines (ELETDOSKIMREP). Mainly for the dual boiler espresso machines Vibiemme Replica and Vibiemme Chimaera. The dosing device runs on 240Vac with 50/60Hz and is suitable for Vibiemme espresso machines up to 3 brewing groups. If you are...

At some point of the life of the espresso machine the touchpanel keys will start to wear off.  This does depends offcours of the amount of usage of the espresso machine. You can use this push button knob on the Cimbali M39 Dosatron and on the M39-GT models. The part reference numbers are 913051007 and 913-051-007. Note: this shiny plastic push...

Rancilio logo plate 115mm original

This push button panel is used on the La San Marco 105 espresso machine. This unit is a OEM/original La San Marco spare part. The part reference number for this item is 108762. The push button panel has in total 6 keys, 4 of them are for pre-set volumetric doses. 1 is for continuous and the other one is for programming. This item has been made in Italy.

The pump on this page is a OEM/Original Cimbali/Faema rotation pump. But this pump is slightly different, most pumps are made from casted brass but these are made from stainless steel. This pump has been made by the Italian company Fluid o tech. The part references for this pump can be found in the extra info tab. This pump has the name Compact plus and...