Rancilio heating element 2500W 230V OEM/original

Dosing device 3D-3GRC 230V AC. Suitable for dosaplus, kometa, mercury

Some models of espresso machines manufactured by Rancilio have quite a special pump. This type of pump is unique to the brand Rancilio. The pump on this page is a OEM/Original Rancilio espresso machine pump and is manufactured by Fluid o Tech/Rotoflow par number MB0204AGANN2520, Model Compact plus. The Rancilio part number for this item is 10705960 What...

This dosing device Dosatura 3d5 Plus 3PID 240Vac, with the Gicar code 9.5.22.37G is being used for Vibiemme espresso machines (ELETDOSKIMREP). Mainly for the dual boiler espresso machines Vibiemme Replica and Vibiemme Chimaera. The dosing device runs on 240Vac with 50/60Hz and is suitable for Vibiemme espresso machines up to 3 brewing groups. If you are...

The item on this product page is a small compression spring, which is a OEM/Original Bezzera spare part. This item has the Bezzera part reference number of 5471512. This compression spring is used for the water inlet on various Bezzera espresso machines. the outer diameter is 9mm and has a overall length of 35mm. You can use this spring on the Bezzera...

On this product page you will find a brass hose barb with a female fitting. The fitting used is a ½” BSP-G thread. The widest section where the tube slides over is 16,5mm. The inner tube has a inner diameter of 10mm. To install a hose over this you will always need to apply a hose clamp, otherwise the hose will come loose.

How am I going to adjust the grind adjustment on my Mazzer coffee grinder? Well your burrs can be adjusted with the burr adjustment ring (SSJ0GHA02) this pin goes into the side of this ring in one of the 5 mounting holes. This specific adjustment pin screws into one of these 5 holes with a M5 thread. Note: if the ring doesn’t move because it is...

Astoria CMA heating element 4000/4350W 230/240V original

The item on this product page is a gigleur/nozzle which can be used on various Astoria espresso machine models The Astoria part reference number for this item is 10300B. This gigleur has been made from machined brass. The thread is a M5 with a pitch of 1mm. The internal hole has a diameter of 1,0mm. This item has been made in Italy. This gigleur can be...