مصنف بواسطة
Price
Manufacturers
اكتب الجزء
more... less
يكتب
Filter

San Remo

صانع آلة إكسبريسو سان ريمو ليس من أقدم مصنعي آلات إكسبريسو، لكنهم اكتسبوا سمعتهم بسرعة كبيرة على مر السنين مع مجموعة متنوعة من آلات إكسبريسو والطواحين.

يمكن أن تتراوح ماكينات الإكسبريسو التي تصنعها سان ريمو في تريفيزو إيطاليا من ماكينات الإكسبريسو الأكثر أساسية إلى البارستا الذي يريد أعلى ماكينات الإكسبريسو. آلات القهوة التي تصنعها سان ريمو مصممة في المقام الأول للسوق التجارية، لكنها لديها أيضا آلات إكسبريسو محلية.

إنهم يصنعون مجموعة متنوعة من آلات إكسبريسو ، في الأساس جميعها آلات إكسبريسو تعمل بالفولين (باستثناء نموذج الرافعة). يستخدمون مجموعة متنوعة من مجموعات البيرة، بدءا من أسلوب e61 ومجموعات البيرة الحلقية طوال الطريق حتى إصداراتهم الخاصة المستخدمة على نماذج مثل أوبرا سان ريمو San Remo (كافيه راسر).

San Remo أجزاء إسبريسو والقهوة والطاحونات

مضخة مضخة سان ريمو 0-3 / 0-15 dia 85

On this product page you will find a double scale manometer suitable for various San Remo espresso machines. This pressure gauge has the San Remo part number 10552023A  The double scale manometer has on the pump side a scale which ranges from 0 to 3 bar. The boiler pressure scale goes from 0 to 3 bar. The body of the manometer is 60 and 63mm. The...
45.77 €

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
1.21 €

حنفية رافعة بعمود صلب مقوى

The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
9.73 €

دليل الفولاذ المقاوم للصدأ تصلب

The item on this page is a hardened steel bushing for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.4 , the Fiorenzato part reference is A1300120 , the Marzocco reference is B.1.004/4 and the...
4.73 €

O ring gasket EPDM 10.77x2.62mm

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...
1.23 €

Parker الصمام الكهربائي ثلاثي الاتجاه من الفولاذ المقاوم للصدأ 220/240V 50/60Hz

The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...
82.93 €

موصل صمام الملف اللولبي

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
2.77 €

Below we will give a small overview of various models Sanremo has made over the years, with a bit of technical info about the espresso machines themselves. At Brooks-Parts we do sell a variety of spare parts for SanRemo espresso machines, this can be OEM/original spare parts or and after market ones.

The SanRemo Zoe

This model of Sanremo is one of the economic models SanRemo produces. The SanRemo Zoe is available in a 1,2,3 and a compact model. The machine itself is a single boiler heat exchanger(HX) espresso machine. The brewing group used on the Zoe is a ring brewing group, to control the dosing on this espresso machine you just need to push one of the push buttons. With this you can select various coffee types.

The SanRemo Verona

This SanRemo Verona model is one of the older models made by SanRemo, which isn’t a bad thing at all. The SanRemo Verona espresso machine comes in various boiler configurations. Seen there is a single HX model, but there is also a model the TCS which has a HX boiler and individual brewing group boilers. The brewing groups used on the San Remo Verona are e61 style of brewing groups, they are solenoid operated.

But you do also have the SanRemo Verona RS, this espresso machine does look identical to the regular SanRemo Verona but isn’t. This espresso machine is a multi boiler espresso machine, where every brewing group has a deciated boiler. This espresso machine is available in a 2 and a 3 group version

SanRemo Café Racer

One of the more high end espresso machines around is the San Remo Café Racer. This espresso machine is also a multi boiler system with thermal PID control. So each brewing group has a dedicated boiler. The boiler used on the Café Racer is one of the own design of San Rem, what makes this brewing group unique is that it is made from stainless steel. This is quite uncommon, seen most brewing groups are made from brass. On top of these brewing groups you will find a display and the coffee selection buttons.

A other thing which makes the open frame structure. Next to this open frame structure you can customize this espresso machine, such as wooden panels and a variety of paint colours.