مصنف بواسطة
Price
Manufacturers
اكتب الجزء
more... less
يكتب
Filter

San Remo

صانع آلة إكسبريسو سان ريمو ليس من أقدم مصنعي آلات إكسبريسو، لكنهم اكتسبوا سمعتهم بسرعة كبيرة على مر السنين مع مجموعة متنوعة من آلات إكسبريسو والطواحين.

يمكن أن تتراوح ماكينات الإكسبريسو التي تصنعها سان ريمو في تريفيزو إيطاليا من ماكينات الإكسبريسو الأكثر أساسية إلى البارستا الذي يريد أعلى ماكينات الإكسبريسو. آلات القهوة التي تصنعها سان ريمو مصممة في المقام الأول للسوق التجارية، لكنها لديها أيضا آلات إكسبريسو محلية.

إنهم يصنعون مجموعة متنوعة من آلات إكسبريسو ، في الأساس جميعها آلات إكسبريسو تعمل بالفولين (باستثناء نموذج الرافعة). يستخدمون مجموعة متنوعة من مجموعات البيرة، بدءا من أسلوب e61 ومجموعات البيرة الحلقية طوال الطريق حتى إصداراتهم الخاصة المستخدمة على نماذج مثل أوبرا سان ريمو San Remo (كافيه راسر).

San Remo أجزاء إسبريسو والقهوة والطاحونات

عنصر تدفئة سان 5100W 380V

The heating element on this page is suitable for various San Remo espresso machine boilers. This model is suitable for 3 group coffee machines. The San Marco part reference for this element is 10455054  This heating element produces 5100W at 380W. The element has 6 connecting poles and in the middle of these poles is a spare tube for a heating...
140.62 €

دليل الفولاذ المقاوم للصدأ تصلب

The item on this page is a hardened steel bushing for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.4 , the Fiorenzato part reference is A1300120 , the Marzocco reference is B.1.004/4 and the...
4.73 €

Faema E61 group upper plug

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
4.10 €

عنصر تدفئة سان 4500 W 230V

The heating element on this page is suitable for various San Remo espresso machine boilers. This model is suitable for 2 group coffee machines. The San Remo part reference for this element is 10455080  This heating element produces 4500W at 230V. The element has 6 connecting poles and in the middle of these poles is a spare tube for a...
124.98 €

o ring gasket 7,2X1,9mm nbr

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
0.45 €

طوقا PTFE 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
1.17 €

صنبور دليل الربيع المشترك

This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
0.96 €

ربيع صمام البخار والماء 10,5x32ملم

This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
1.10 €

Vibiemme Lollo الصنبور المياه/البخار

On this product page you will find a chrome plated steam and water valve suitable for the Vibiemme Lollo espresso machines. The Vibiemme part reference of this item is ASSRACCRUBLOLLO  This steam and water valve has been made from brass and chrome plated afterwards. The in and outlet fittings are on both sided a 3/8”BSP-G thread.  This...
73.19 €

Below we will give a small overview of various models Sanremo has made over the years, with a bit of technical info about the espresso machines themselves. At Brooks-Parts we do sell a variety of spare parts for SanRemo espresso machines, this can be OEM/original spare parts or and after market ones.

The SanRemo Zoe

This model of Sanremo is one of the economic models SanRemo produces. The SanRemo Zoe is available in a 1,2,3 and a compact model. The machine itself is a single boiler heat exchanger(HX) espresso machine. The brewing group used on the Zoe is a ring brewing group, to control the dosing on this espresso machine you just need to push one of the push buttons. With this you can select various coffee types.

The SanRemo Verona

This SanRemo Verona model is one of the older models made by SanRemo, which isn’t a bad thing at all. The SanRemo Verona espresso machine comes in various boiler configurations. Seen there is a single HX model, but there is also a model the TCS which has a HX boiler and individual brewing group boilers. The brewing groups used on the San Remo Verona are e61 style of brewing groups, they are solenoid operated.

But you do also have the SanRemo Verona RS, this espresso machine does look identical to the regular SanRemo Verona but isn’t. This espresso machine is a multi boiler espresso machine, where every brewing group has a deciated boiler. This espresso machine is available in a 2 and a 3 group version

SanRemo Café Racer

One of the more high end espresso machines around is the San Remo Café Racer. This espresso machine is also a multi boiler system with thermal PID control. So each brewing group has a dedicated boiler. The boiler used on the Café Racer is one of the own design of San Rem, what makes this brewing group unique is that it is made from stainless steel. This is quite uncommon, seen most brewing groups are made from brass. On top of these brewing groups you will find a display and the coffee selection buttons.

A other thing which makes the open frame structure. Next to this open frame structure you can customize this espresso machine, such as wooden panels and a variety of paint colours.