مصنف بواسطة
Price
Manufacturers
اكتب الجزء
more... less
يكتب
Filter

San Remo

صانع آلة إكسبريسو سان ريمو ليس من أقدم مصنعي آلات إكسبريسو، لكنهم اكتسبوا سمعتهم بسرعة كبيرة على مر السنين مع مجموعة متنوعة من آلات إكسبريسو والطواحين.

يمكن أن تتراوح ماكينات الإكسبريسو التي تصنعها سان ريمو في تريفيزو إيطاليا من ماكينات الإكسبريسو الأكثر أساسية إلى البارستا الذي يريد أعلى ماكينات الإكسبريسو. آلات القهوة التي تصنعها سان ريمو مصممة في المقام الأول للسوق التجارية، لكنها لديها أيضا آلات إكسبريسو محلية.

إنهم يصنعون مجموعة متنوعة من آلات إكسبريسو ، في الأساس جميعها آلات إكسبريسو تعمل بالفولين (باستثناء نموذج الرافعة). يستخدمون مجموعة متنوعة من مجموعات البيرة، بدءا من أسلوب e61 ومجموعات البيرة الحلقية طوال الطريق حتى إصداراتهم الخاصة المستخدمة على نماذج مثل أوبرا سان ريمو San Remo (كافيه راسر).

San Remo أجزاء إسبريسو والقهوة والطاحونات

اتصال مخروطي لصمام البخار والماء

The steam and water valve on this product page can be used on San Remo espresso machines. The part reference for this item is 10402120B. This steam and water valve has a flat connection so it is suitable for a conical fitting. There is also a flared model available of this version. This valve has been made in Italy. You can find this steam and water...
45.36 €

San Remo مسبار الحرارة 1/4 "M NTC

The item on this product page is a OEM/original Sanremo spare part. This is a temperature probe. The part reference number for this item is 10112178A This temperature probe has a male thread which is ¼” M. This is a NTC probe which is 3,3K The bulb itself has a diameter of 7,5mm and a length of 24mm. the cable has a length of 220mm. This temperature probe...
69.16 €

صمام الأمان 3/8 2 بار CE

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
12.87 €

صيف الضغط 14x33 ملم

This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has...
1.73 €

مستوى المياه

This sight glass fitting is used on a variety of espresso machine brands such as Vibiemme, La Scala, Brasilia and Gaggia. The Brasilia part reference is 00089.0.10.04 , the Gaggia reference is LV0505 and the Vibiemme (VBM) part references are RACCP227 and RACCP427. This sight glass fitting has a male 3/8” BSP-G thread. The central hole is...
5.12 €

Faema E61 valve gasket 13x4mm

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
0.59 €

دليل الحلقات النحاسية

The item on this page is a hardened brass gasket holder for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.5, the Fiorenzato part reference is A2200268 , the Marzocco reference is B.1.004/5  and...
4.38 €

صمام (لوسيفر) المصاب بمرض النسيج 3 طريق قاعدية تصل إلى 115V 50/60Hz

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
81.54 €

Faema E61 group upper plug

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
4.10 €

Below we will give a small overview of various models Sanremo has made over the years, with a bit of technical info about the espresso machines themselves. At Brooks-Parts we do sell a variety of spare parts for SanRemo espresso machines, this can be OEM/original spare parts or and after market ones.

The SanRemo Zoe

This model of Sanremo is one of the economic models SanRemo produces. The SanRemo Zoe is available in a 1,2,3 and a compact model. The machine itself is a single boiler heat exchanger(HX) espresso machine. The brewing group used on the Zoe is a ring brewing group, to control the dosing on this espresso machine you just need to push one of the push buttons. With this you can select various coffee types.

The SanRemo Verona

This SanRemo Verona model is one of the older models made by SanRemo, which isn’t a bad thing at all. The SanRemo Verona espresso machine comes in various boiler configurations. Seen there is a single HX model, but there is also a model the TCS which has a HX boiler and individual brewing group boilers. The brewing groups used on the San Remo Verona are e61 style of brewing groups, they are solenoid operated.

But you do also have the SanRemo Verona RS, this espresso machine does look identical to the regular SanRemo Verona but isn’t. This espresso machine is a multi boiler espresso machine, where every brewing group has a deciated boiler. This espresso machine is available in a 2 and a 3 group version

SanRemo Café Racer

One of the more high end espresso machines around is the San Remo Café Racer. This espresso machine is also a multi boiler system with thermal PID control. So each brewing group has a dedicated boiler. The boiler used on the Café Racer is one of the own design of San Rem, what makes this brewing group unique is that it is made from stainless steel. This is quite uncommon, seen most brewing groups are made from brass. On top of these brewing groups you will find a display and the coffee selection buttons.

A other thing which makes the open frame structure. Next to this open frame structure you can customize this espresso machine, such as wooden panels and a variety of paint colours.