مصنف بواسطة
Price
Manufacturers
اكتب الجزء
more... less
يكتب
Filter

San Remo

صانع آلة إكسبريسو سان ريمو ليس من أقدم مصنعي آلات إكسبريسو، لكنهم اكتسبوا سمعتهم بسرعة كبيرة على مر السنين مع مجموعة متنوعة من آلات إكسبريسو والطواحين.

يمكن أن تتراوح ماكينات الإكسبريسو التي تصنعها سان ريمو في تريفيزو إيطاليا من ماكينات الإكسبريسو الأكثر أساسية إلى البارستا الذي يريد أعلى ماكينات الإكسبريسو. آلات القهوة التي تصنعها سان ريمو مصممة في المقام الأول للسوق التجارية، لكنها لديها أيضا آلات إكسبريسو محلية.

إنهم يصنعون مجموعة متنوعة من آلات إكسبريسو ، في الأساس جميعها آلات إكسبريسو تعمل بالفولين (باستثناء نموذج الرافعة). يستخدمون مجموعة متنوعة من مجموعات البيرة، بدءا من أسلوب e61 ومجموعات البيرة الحلقية طوال الطريق حتى إصداراتهم الخاصة المستخدمة على نماذج مثل أوبرا سان ريمو San Remo (كافيه راسر).

San Remo أجزاء إسبريسو والقهوة والطاحونات

مرشح الفولاذ المقاوم للصدأ 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
2.77 €

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
1.21 €

مربع دليل الصمام 12،1mm 6x6mm m3

The item on this product page is a square brewing group/valve pin. This valve pin can be used on various brands such as Vibiemme, Faema, Pavoni and Wega. The Vibiemme part references are RACCGAVAERQU and RACCGAVAINQU, for Wega the reference is WY27421012, for Pavoni the references are 312225 and 312227. For Faema the references are...
1.25 €

مجموعة الاختراق 0.6mm

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
1.26 €

سان ريمو فيرونا RS العرض الأصلي

The display shown on this product page is a OEM/original San Remo spare part. This display is solely used on the San Remo Verona RS espresso machine. This display is made by the Italian company Gicar. The Gicar part reference number is 8.8.74.27G. The San Remo part reference number is 10112384D This electronic board display comes in a plastic case. The...
668.75 €

صمام المرجل 3/8" عيار 1.8بار CE/PED

On this product page you will find a boiler safety valve. This specific model of safety valve can be used on various San Remo espresso machines. The San Remo part references are 10652012, 10652012A and 10652012B. This boiler safety valve has a male 3/8”BSP-G thread. The calibrated pressure is 1,8 bar. When opened the flowrate is 49,82 kg/h....
30.06 €

عنصر تدفئة سان 2700W 230/380V 1/4

The heating element on this page is suitable for a 2 group San Remo espresso machine. The San Remo part reference for this item is 10455052  The heating element produces 2700W with 230/380V, there are 6 connecting poles. This element has a immersed length of 325mm. The element has a screw in flange which has a diameter of 1”1/4. In the middle...
91.95 €

تجميع صمام الصرف

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
7.17 €

طوقا PTFE 20x17x2mm

This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
0.86 €

Below we will give a small overview of various models Sanremo has made over the years, with a bit of technical info about the espresso machines themselves. At Brooks-Parts we do sell a variety of spare parts for SanRemo espresso machines, this can be OEM/original spare parts or and after market ones.

The SanRemo Zoe

This model of Sanremo is one of the economic models SanRemo produces. The SanRemo Zoe is available in a 1,2,3 and a compact model. The machine itself is a single boiler heat exchanger(HX) espresso machine. The brewing group used on the Zoe is a ring brewing group, to control the dosing on this espresso machine you just need to push one of the push buttons. With this you can select various coffee types.

The SanRemo Verona

This SanRemo Verona model is one of the older models made by SanRemo, which isn’t a bad thing at all. The SanRemo Verona espresso machine comes in various boiler configurations. Seen there is a single HX model, but there is also a model the TCS which has a HX boiler and individual brewing group boilers. The brewing groups used on the San Remo Verona are e61 style of brewing groups, they are solenoid operated.

But you do also have the SanRemo Verona RS, this espresso machine does look identical to the regular SanRemo Verona but isn’t. This espresso machine is a multi boiler espresso machine, where every brewing group has a deciated boiler. This espresso machine is available in a 2 and a 3 group version

SanRemo Café Racer

One of the more high end espresso machines around is the San Remo Café Racer. This espresso machine is also a multi boiler system with thermal PID control. So each brewing group has a dedicated boiler. The boiler used on the Café Racer is one of the own design of San Rem, what makes this brewing group unique is that it is made from stainless steel. This is quite uncommon, seen most brewing groups are made from brass. On top of these brewing groups you will find a display and the coffee selection buttons.

A other thing which makes the open frame structure. Next to this open frame structure you can customize this espresso machine, such as wooden panels and a variety of paint colours.