Astoria Argenta
The portafilter on this product page is a 1 coffee portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models.
This portafilter has a single open spout. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The portafilter comes with a stainless...
€48.69
Copper gasket 18x14x1.5mm 1/4"
The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio.
You will mainly see the use of this copper gasket to seal...
€1.78
Astoria CMA heating element 3000/3266W 230/240V original
Astoria CMA heating element 3000/3266W 230/240V original
€204.97
RPM clamp ring motor 330W 220/240V 50/60Hz
This RPM motor pump(model number C042204) is one of the more uncommon espresso machine pumps used. The cooling of this motor occurs by running the water which comes out of the pump true the motor to cool it down. This type of coffee machine pump is only used by the Astoria CMA group, so you would only see them on Astoria CMA and Wega espresso machines....
€277.74
Sight glass gasket 16x10x8mm
The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC.
This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has...
€1.17
Astoria Wega steam valve gasket holder
This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616.
This gasket holder has on one side room for the flat gasket with the...
€7.51
Astoria double coffee portafilter original
The double portafilter shown on this product page is a OEM/Original Astoria espresso machine spare part. The Astoria part reference for this item is 27311051 and 8327311051R. Note, this is the reference for the body 27311000.
This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 45 degree....
€89.61
Double scale boiler pump manometer 0 - 2.5 / 0 -16 bar
On this product page you will find a double pressure gauge. This pressure gauge can mainly be found on espresso machines such as Astoria and Wega. The Astoria part reference for this manometer is 1245504 and for Wega the part reference is WY21107
The manometer has on one side the boiler pressure, this goes from 0 to 2,5bar. The other side has the...
€36.96
Anti vacuum valve V.A.R. 1/4"
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands.
This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€8.70
Parker 2 way solenoid valve 1/8" 1/8" 230V
On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443.
This solenoid valve is a version which has a female threaded in...
€82.93
T fitting brass 1/4" MMM
The item on this fitting page is a 3 way T fitting. This fitting has on each side a ¼”male fitting, made in Italy.
This T fitting has a nickel finish on it, it is possible that you get one without the nickel finish.
On each side the thread used is a ¼”BSP-G fitting in the male configuration.
You can use this T fitting in...
€4.08