On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443.
This solenoid valve is a version which has a female threaded in and outlet port. The thread type used is a 1/8” BSP-G thread. In this valve the orifice used has a diameter of 2,5mm
The coil used on this valve is a ZB09 9W this coil is suitable for 220/230V at 50/60Hz
This coil uses 2 types of maximum pressure. At 50 Hz the max pressure is 14 bar and at 60Hz the max pressure is 10 bar. The minimum fluid temperature is -10 degrees and the maximum fluid temperature is 140 degree Celsius.
You can use this solenoid valve on Carimali, Grimac, San Remo, La Cimbali, Bezzera and Casadio espresso machines.
On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J
This solenoid valve...
On this page you will find a 3 way solenoid made by the parker company. The Parker part number used for this solenoid valve is 393430J
This solenoid valve has a threaded in and outlet which are both 1/4” BSP-G. the exhaust valve is a 1/8” BSP-G thread which is conical. This specific valve has a 9W coil which is a 220/230V at 50/60Hz. The coil...
With a standard flange solenoid valve you only need 2 small o rings to seal this off, this is the case with brands such as Asco/sirai, Parker, Lucifer and Ode. But the brand Parker has also stainless steel solenoid valve, which use a o ring and a outer gasket, which is not a o ring.
This type of gasket used on various espresso machine brands such as...
On this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J
This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....
This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J
This solenoid valve is a 3 way valve. The...
