On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...

Solenoid valve screw M4x10. sold per pack of 4

Valve rod washer 20x6.3x1.5. Suitable for: CodeProducer 93.00058 Carimali 25012521 Expobar 30370100 Expobar 4054043423 Faema L165/9 Marzocco L165/9B Marzocco 00000096 Nuova Simonelli 10402040 Sanremo

OR 47.22x3.53 Viton

When you have just used your steam wand to make a perfect latte. But you want to clean your steam wand, but you can’t because the metal is too hot. Don’t worry, we sell protective rubber sleeves which don’t pass on the heat so you won’t burn your hands. This specific model is suitable for a steam pipe which has a diameter of 10mm...

The nut on this product page is a welding end cap nut. This nut is used to install the tube with the welding end cap to a other fitting.  This brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 12,5mm. This brass...

Stainless steel shower screw

The single coffee stainless steel filterbasket on this page can be used with a variety of La Cimbali espresso machines. This item has been made in Italy by IMS filtri with the part reference GC1T044 The 1 cup coffee filter basket has a outer edge diameter of 68mm and a height of 22,5mm. The hole pattern is located in a diameter of 30mm.  The filter...

The steam valve knob on this page is suitable for the La Cimbali M100 espresso machine. The steam valve knob has the La Cimbali part reference of 947-506-000. The steam valve knob has been manufactured in Italy This knob does not come with the retaining spring, part reference 485154000. You can find this part in the accessory tab below.

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...