Faema E61 valve gasket 15,5x7,5x4mm
search
  • Faema E61 valve gasket 15,5x7,5x4mm

Faema E61 valve gasket 15,5x7,5x4mm

€0.59
VAT included

€0.49 tax excl.

qty

Volume discounts

Quantity Unit discount You Save
50 20% Up to €5.90
compare
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia, Grimac, La Pavoni and so on.

Earlier mentioned that it is used as a shaft gasket, you would also expect on steam and water valves used on Vibiemme Faema, Grimac and La Pavoni Espresso machines.

You see with a lot of brands like Grimac, La Pavoni, Faema, Vibiemme a lot of similarities with the parts used.

If you are not sure if the shaft gasket is also suitable for your machine, just send us a message.

28-097-L-1186312
629 Items

Data sheet

Bezzera
Galatea
Brasilia
Century
Gradisca
Portofino
ECM
Giotto
Veneziano
Faema
Due
Due A
Due S
E61
E61 Jubile
E61 legend
E64
E66
Faema E61 Jubilé A1
Faema E61 Jubilé A2
Faema E61 Legend S1
Faema E61 Legend S2
Faema E61 Legend S3
Inner diameter (ID)
7.5mm
Outer diameter (OD)
15.5mm
part number
BFC 0530080
Bezzera 7479968
Brasilia 08570.0.00.02
ECM C219900426
ECM heidelberg C219900426
Expobar 50000030
Faema 4701018537
Faema 4701135903
Grimac 1110100043
Grimac 1110100044
Grimac F007
Grimac F008
Grimac GR353
Grimac P289
Grimac VBM001
Grimac W547
Isomac ISRONTM155754
Pavoni 362028
Rocket C219900426
Vibiemme GUARPICA
Wega W10334
Wega WY27421017
Thickness
4mm
Vibiemme
Chimaera
Cubo
Domobar
Domobar Junior
Domobar Super
Dosaplus
Evolution
Kometa
Lollo
Mercury
Minimax
Replica
Revolution
Silver
Is a vintage E61 steam valve the same as the modern steam valves? insert_link

Well that answer is pretty simple, no it isn’t. The original valve works as following, when you turn the shaft inwards the valve pin will push a gasket holder. The steam can go out, close it again and no steam can go out. In the case of the modern E61 valves is that behind the gasket holder is a small stainless steel ball with a spring.

Are there differences between the Faema E61 brewing groups? insert_link

From the beginning of the Faema E61 brewing group are basically no differences between the parts installed inside the brewing group. Parts such as the valve gaskets, springs, valve assemblies and portafilters have all remained the same. The biggest change is the small cleaning hole on the front of the brewing group. With the earliest models this hole didn´t exist.

How many types of boilers are there on the Faema E61? insert_link

There are 5 types of boiler used on the Faema E61 espresso machine. The most well known is the double flanged model. You have on one side the heating element flange and on the other side the water level flange, both are out of production. These are held in place with aluminium boiler rings. For the single groups you have a boiler with a flange on one side.

The next model is a stainless steel boiler, with one flange. This type of boiler is less common then the copper boiler above. There is also a later model stainless steel, which doesn’t have a removable flange. Both these boilers have corrosion issues, this has to do because of the stainless steel.

The latest model is also a copper boiler, this boiler has a single heat exchanger(HX) in the middle. Most modern espresso machines have for each individual brewing group a individual HX.

Is the Faema E61 espresso machine suitable for a busy bar/café insert_link

Yes it is, but this depends on various factors. The first thing is experience, seen this is a manual operated espresso machine it requires a lot more attention from the barista then a solenoid operated model. There you need to stop the brewing process manually. If you don’t have the experience you probably can’t hold up with the tempo which is required at such a bar. Then I would advice to go for the Faema E61 Jubilee, this is the solenoid operated version of the Faema E61 Legend espresso machine.

Comments (0)
No customer reviews for the moment.

8 other product