On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND.
The pump in question is a flange pump. This pump is attached the espresso machine motor with 2 bolts/screws. The pump can be clamped around it and tightened to the motor. This pump/motor combination does require a motor coupling set. Otherwise the motor will spin, but doesn’;t move the pump.
The compact plus model has a flowrate of 150L/H and has a balanced bypass. The fittings used on this pump are 3/8” BSP-G and has a NSF approval.
But the big question. How do I adjust the pump pressure on my pump? Loosen the hex nut. Now you can turn the set screw inwards and outwards. Inwards increase pressure outwards decrease pressure.
For which espresso machine models is this pump suitable? You can use this pump on the Casadio Dieci and the Casadio Quindici. But also on the La Cimbali M39, La Cimbali M39-GT and the La Cimbali M34. For Faema espresso machines you can use it on the Faema Teorema and the Faema Emblema.
Ulka vibration pump EAP5 120V with plastic outlet Max pressure 15 bar, Max flow rate 650 cc/min. ON/OFF time 1/1,5 min. Correct working: 1 min. ON / 1,5 min. OFF. NSF.
The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000
This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it....
This pump is made by the company Ulka, which is nowadays parts of Ceme. This specific model of Ulka vibration pump is the EAX5 and is powered by 220V at 60Hz with 64W. This pump has the Ceme part reference numbers of 1.01.382.07/PA and 10138207PA
This pump has a in and outlet, on the inlet side you have a hose connection which has a diameter of 6mm. On...
The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...
The pump on this product page is made by the Italian company Ulka. This type of pump is called a vibration pump and doesn’t require a motor. This specific model is the EP5, the Ulka part reference number is 1.01.305.05/PA and the Ceme part refence numbers are 1.01.305.05/PA and 10130505PA.
This model of pump is the 120V 60Hz version of the EP5 and uses...
This Procon rotation pump is slightly different then most pumps made for the espresso machine market by Procon. This pump is only suitable for a selection of coffee machine brands. The Procon part number for this item is 112T060F123B130
As mentioned earlier this is a bolt on espresso machine pump. The motor has a flange with bolt holes in in it. You...
The pump on this page is a OEM/Original Cimbali/Faema rotation pump. But this pump is slightly different, most pumps are made from casted brass but these are made from stainless steel. This pump has been made by the Italian company Fluid o tech. The part references for this pump can be found in the extra info tab.
This pump has the name Compact plus and...
