Bezzera spring 11,7x16mm
search
  • Bezzera spring 11,7x16mm

Bezzera vår 11,7x16mm

€ 3.62
Inklusive MVA

€ 2.99 eks. mva.

qty
Siste varer på lager

compare
  GDPR-overholdelse

Beskytte dine personlige data

  Fraktpolicy

Alt om frakt av bestillingen din

  Returpolicy

alle inns og outs om vår returpolicy

Den koniske kompresjonsfjellet på denne sida er ein OEM/Original Bezzera reservdelar. Den Bezzera delreferanse for denne posten er 5471532. Denne våren vert brukt i kombinasjon med damp- og vannrørene.

Denne trykkspringinga av rustfritt stål er på botten 9,5 mm og på toppen 11,7 mm. Lengda på denne kompresjonsfjelen er 17 mm.

Denne kompresjonsfjelen kan finnast med ulike Bezzera modeller som Bezzera Strega, Bezzera Mitica, Bezzera Magica, Bezzera Giulia, Bezzera Galatea Domus, Bezzera BZ35, Bezzera BZ10, Bezzera BZ07 og Bezzera BZ40.

Bezzera
12-541-L-5057135
1 Artikkel

Dataark

Bezzera
BZ07
BZ10
BZ35
BZ40
Galatea Domus
Mitica
Strega
delenummer
Bezzera 5471532
Lengde
17mm
Merke
Bezzera
Type
Original
Type del
Compression spring
Ytre diameter (OD)
9,5mm
11,7mm
Can I use the Bezzera BZ10 espresso machine for commercial purposes? insert_link

We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.

What kind of temperature control mechanism does the Bezzera BZ10 have? insert_link

Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.

What kind of brewing group does the Bezzera BZ10 have? insert_link

This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.

Is the Bezzera BZ10 espresso machine fitted with a water tank or a main water connection? insert_link

The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.

How do I check the pressure of my Bezzera BZ10 espresso machine? insert_link

The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.

Kommentarer (0)
Ingen kundeanmeldelser enda.

8 other product