Gaggia
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands.
This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€8.70
Ulka vibration pumps suction fitting
The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033
This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
€2.20
Gaggia E90/D90 valve knob
This Gaggia steam valve knob is a original/OEM espresso machine part. This Gaggia steam valve knob can be used on the Gaggia D90 and the Gaggia E90 espresso machine.
This steam valve knob has a lower outer diameter of 44mm and a upper diameter of 42mm. The length of this knob is 48,5mm. The hole for the pin is 8x8mm. The knob has been made in Italy....
€34.97
Push button on/off 16A 250V
The bipolar switch on this page can be found in various espresso machine brands such as Elektra and Gaggia. The Elektra part reference is 01221035 and the Gaggia part reference is 5024008000.
This bipolar switch is rated up to 16A at 250V. This switch has been made in Italy.
You can find this switch on the Elektra Miniverticale, Gaggia XE and the...
€5.55
Portafilter gasket 72,7x57x8mm orange silicone
The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone. You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema...
€4.50
Filterbasket spring 1,2mm 3 sides straight
To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. You can use spring on brands such as Casadio, Carimali, San Remo, Bezzera, Cimbali, Astoria, Spaziale
This spring is made from stainless steel. The cord diameter is 1,2mm....
€0.82
Gaggia water valve handle
The valve handle on this product page can be used on various espresso machine brands like Gaggia and Saeco. The Gaggia part references for this item are 1034.147.050 andWGA8001028000. The Saeco part references are1034.147.050 and WGA8001028000.
This knob is used on steam and water valves. In the middle is place for a doming sticker....
€49.54
Gaggia heating element 1 gr 2000W 220/380V
On this page you will find a heating element suitable for various Gaggia espresso machines. This heating element is suitable for 1 group Gaggia models.
This heating element produces 2000W at 220/380V and has 6 connecting poles. The immersed length of this element is 347mm. The flange diameter is 75/53mm, the distance between the holes is 43mm.
The...
€67.87
Gicar flowmeter 1/4D 1,15 connector with led
The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands.
This specific flowmeter does not come with a fixed wire,...
€55.65
Gaggia touchpanel and electronic box TH 3P 230V
The touchpanel on this page is a used on Gaggia espresso machines. The Gaggia part reference number for this item is DM1622, the Gicar part reference number is 9.5.26.24G
This unit is called the TH 3P and is not only a touchpanel but also a level regulator for the espresso machine. This unit runs on 230V and has been made in Italy.
This touchpanel/level...
€326.45