List of products by brand La Scala

The gasket on this product page is used on the Faema E61 brewing groups and the E61 style of brewing groups such as with Rocket, La Scala, Grimac, la Pavoni and Wega. The part reference numbers for this gasket can be found in the extra info tab. This gasket is made from AFM34 from the company Victor Reinz. This gasket has good sealing properties, even...

Anti vacuum valve 1/4".

The item on this page is a ball valve. This ball valve can be used on a variety of espresso machine brands such as Gaggia, Victoria Arduino, La Pavoni, Nuova Simonelli, La Spaziale, Grimac, La Scala, San Marco and Royal. This ball valve has been made from chrome plated brass. This valve has a both ¼” BSP-G fittings. But one is male and the...

Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria...

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...

On this product page you will find a complete E61 style brewing group. There are a variety of E61 style brewing groups. Examples of this are the Solenoid valve groups, with the solenoid valve at the bottom, or on the sides. This E61 style brewing group can be used on Fiorenzato, Grimac and La Scala espresso machines. The Fiorenzato part reference fort...

This PTFE gasket can be used on the famous Faema E61 brewing groups, but also on a variety of E61 style of brewing groups. Like with La Scala, Grimac, Pavoni, Wega and Fiorenzato. The part reference numbers can be found in the extra info tab. This flat gasket is made from the material PTFE. The outer diameter is 36,5mm and the inner diameter is 30mm and...

The steam and water valve knob on this page is mainly famous as the knobs used on the classic Faema E61 espresso machines. But nowadays they are used in a variety of other brands as well. Like with Vibiemme, La Scala and Grimac. This type of knob can also be used on the modern Faema E61 legend and Jubilee espresso machines. For the part references check...

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.70G. Note: this is the 115V version and not the 230V version This Gicar level regulator has the name NRL30/1E-2C/F and runs on 115Vac. You can find this level regulator on various espresso machines such as the...

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.71G. there are a lot more product codes, you can find those in the extra info tab. This Gicar level regulator has the name NRL30/1E-2C/F and runs on 230Vac. You can find this level regulator on various espresso...