On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a plastic outlet fitting. The disadvantage of this is that the threads wear out a lot faster then with the brass outlet.
To power the vibration pump there are on top of the vibration pump 2x 6,3x0,8mm 2 male spade connectors. The maximum water temperature for this vibration pump is 20°C with a maximum pressure of 15bar (this pump is not adjustable)
This vibration pump is used by a variety of espresso machine manufacturers like: Vibiemme, ECM, Astoria, Grimac, La Spaziale, La Pavoni, Victoria Arduino, Cimbali, Isomac and ECM
If you are not sure if the Ulka EX5 230V is suitable for your espresso machine. Don’t hesitate to contact us and we might be able to find the correct part for you
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033
This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
This pump is one of the smaller model pumps made by the Italian company Ulka. This pump is called the NME 4, with the Ulka product code 1.02.535.04.
This pump has a plastic in and outlet. The diameter of the hose barb on the inlet side is 5mm and on the outlet side it is 6,6mm. This is a low pressure pump with a maximum pump capacity of 2,5bar and...
On this page you will find a espresso machine pump, made by the company Procon. This pump can be used on various espresso machine brands such as Cimbali, Faema and La Spaziale. The Cimbali part references for this item are 533-180-200, 533197300, 533-197-300. For Faema they are 533180200 and 533197300. For La Spaziale the part reference is 05408....
Fluid o tech is not only famous because of their rotation pumps. But also for their vibration pumps, this principle is the same as with the Ulka vibration pumps. But these pumps are a lot more durable. The part number for this part is 1106PAIFB2E0000.
On this page you will find the 70W vibration pump which runs on 100/110V at 50/60Hz. These pumps can not...
