- New
0
My cart
Vibiemme heating element 800W 230V
€44.07
€36.42 tax excl.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
On this page you will find a heating element used in Vibiemme(ELETRESD80022) espresso machines. To be precise in the dual boiler of the Vibiemme Replica and Vibiemme Chimaera. But it also used in the domestic espresso machine the Vibiemme Domobar Super.
This specific heating element produces 800W with 230V on 50/60Hz. The element has 2 connections both have male 6,3x0,8mm male spade connect. The heating section is made from copper and the threaded flange is made from brass has a diameter of 1”. The immersed length of this heating element is 130mm.
If you are not sure if this specific heating element is suitable for your Vibiemme espresso machine, just send us a message and we will try to help you.
55-311-L-1755284
2 Items
Data sheet
- Brand
- Vibiemme
- Heating element thread
- 1"
- part number
- Vibiemme ELETRESD80022
- Submerged length
- 130mm
- Type part
- Heating element
- Vibiemme
- Chimaera
Domobar Super
Replica - Voltage
- 230V
- Watt
- 800W
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
Comments (0)
No customer reviews for the moment.
8 other product
Nuert plane rod pump 200 L/H with side connector
The pump on this page is made by the Italian company Nuert. This company is not as well-known as companies like Procon and Fluid o tech. This specific pump is used only on Rancilio espresso machines. The Nuert part number for this pump is: APR2AZ1N_AGRA and is NSF approved.
This pump is a rotation pump with a clamp connection. So, the pump is clamped...
€130.24
Nipple 3/8"M x 3/8"NPT M
The fitting on this page is mainly used on espresso machine pumps, which have a 3/8” NPT connection. This type of fitting can be found on espresso machine brands such as Cimbali, Grimac, La Pavoni and Fiorenzato. The Cimbali part references are 532500600 and 532-500-600, for Faema the reference is 532500600, for Fiorenzato and Grimac the...
€3.90
Procon clamp ring pump 180 L/H
The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B
The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€179.36
Astoria Wega steam water shaft gasket
The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204
This gasket has been made out...
€1.24
portafilter gasket 74x57.5x8mm
The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab.
This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...
€3.19