Safety valve 3/8" 1,8bar CE PED IV
search
  • Safety valve 3/8" 1,8bar CE PED IV

Trykkventil 3/8" 1,8bar CE PED IV

€ 10.58
Inklusive MVA

€ 8.74 eks. mva.

qty
Siste varer på lager

compare
  GDPR-overholdelse

Beskytte dine personlige data

  Fraktpolicy

Alt om frakt av bestillingen din

  Returpolicy

alle inns og outs om vår returpolicy

Kaldesikkerhetsventilen på denne sida finst hovudsakleg på La Pavoni kjellar til espresso-maskiner. Den La Pavoni delreferanse for dette elementet er 395221G

Denne kaselen har ein maskulin 3/8BSP-G garn. Forinnstilt trykk er 1,8 bar og ikkje justerbar. Forseglingen som vert brukt er ein FKM-forsegling. Denne ventilen er CE- og PED-sertifisert. Ventilen er laga i Italia.

Du kan bruka denne kaselen på La Pavoni Bar, La Pavoni Bart, du veit kva eg gjer, La Pavoni Pub og La Pavoni Kafé.

La Pavoni
50-692-L-1523054
1 Artikkel

Dataark

delenummer
Pavoni 395221G
Merke
La Pavoni
Montering av gjenger 1
3/8" M
Produksjonsland
Made in Italy
Sertifisering
Yes
Sikkerhetsventiltrykk (bar)
1.8
Type del
Safety valve
Is a vintage E61 steam valve the same as the modern steam valves? insert_link

Well that answer is pretty simple, no it isn’t. The original valve works as following, when you turn the shaft inwards the valve pin will push a gasket holder. The steam can go out, close it again and no steam can go out. In the case of the modern E61 valves is that behind the gasket holder is a small stainless steel ball with a spring.

Are there differences between the Faema E61 brewing groups? insert_link

From the beginning of the Faema E61 brewing group are basically no differences between the parts installed inside the brewing group. Parts such as the valve gaskets, springs, valve assemblies and portafilters have all remained the same. The biggest change is the small cleaning hole on the front of the brewing group. With the earliest models this hole didn´t exist.

How many types of boilers are there on the Faema E61? insert_link

There are 5 types of boiler used on the Faema E61 espresso machine. The most well known is the double flanged model. You have on one side the heating element flange and on the other side the water level flange, both are out of production. These are held in place with aluminium boiler rings. For the single groups you have a boiler with a flange on one side.

The next model is a stainless steel boiler, with one flange. This type of boiler is less common then the copper boiler above. There is also a later model stainless steel, which doesn’t have a removable flange. Both these boilers have corrosion issues, this has to do because of the stainless steel.

The latest model is also a copper boiler, this boiler has a single heat exchanger(HX) in the middle. Most modern espresso machines have for each individual brewing group a individual HX.

Is the Faema E61 espresso machine suitable for a busy bar/café insert_link

Yes it is, but this depends on various factors. The first thing is experience, seen this is a manual operated espresso machine it requires a lot more attention from the barista then a solenoid operated model. There you need to stop the brewing process manually. If you don’t have the experience you probably can’t hold up with the tempo which is required at such a bar. Then I would advice to go for the Faema E61 Jubilee, this is the solenoid operated version of the Faema E61 Legend espresso machine.

Kommentarer (0)
Ingen kundeanmeldelser enda.

8 other product