2,63 € zzgl. MwSt.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
Auf dieser Seite finden Sie eine Faserdichtung mit einem Außenmaß von 41 mm, einem Innenmaß von 33 mm und einer Höhe von 3 mm. Diese Faserdichtung wird für ein heizkörper mit einem Flanschdurchmesser von 1 Zoll verwendet. Diese spezielle Heizelementdichtung wird für Bezzera (5492004) Espressomaschinen der Modelle Bezzera BZ35, Bezzera BZ40, Bezzera Galatea Domus und Bezzera Strega verwendet.
Dieser spezielle Dichtungstyp wird auch bei Vibiemme(GUARCALDOM) Espressomaschinen verwendet. Zum Beispiel für den 2. Kessel der Vibiemme Replica und der Vibiemme Chimaera. Ebenso für die Vibiemme Domobar Junior und für die Vibiemme Domobar Super.
Bei Heizelementen ist es immer ratsam, die aktuellen Heizelemente in Ihrer Maschine zu vergleichen, um sicherzustellen, dass sie tatsächlich miteinander kompatibel sind.
Technische Daten
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
