GDPR-overholdelseBeskytte dine personlige data
FraktpolicyAlt om frakt av bestillingen din
Returpolicyalle inns og outs om vår returpolicy
På denne sida finn du ei oppvarmingselement for bryggegruppa til ein La Spaziale S1 Rossini. Du kan ikkje. Referansen til dette varmeelementet er 07201
Dette varmeelementet produserer 1250W ved 230V og har 2 tilkoblingspoler. Den nedsenka lengda til varmeelementet er 155 mm. Flensjen har ein ytre diameter på 50 mm.
Dataark
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
