Filter by
Categories
Price
Manufacturers
Type part
more... less
Brand
more... less
Filter

Brewing group

On this overview page you will find basically all the parts you are going to need for your espresso machine brewing group. The most well known brewing group around is the E61 lever brewing group, which originates from the Faema E61 espresso machine. It has its origin with Faema, but there are a lot of differences between the brands they use. You can find this type of brewing group can be found on brands such as San Remo, ECM Heidelberg,Vibiemme, Bezzera, Wega, Grimac, La Scala and Brasilia.

On this page you will find the standard general maintenance parts like the portafilter gaskets, shower screensbrewing group gaskets and brewing group filter mesh. But also items which don’t get replaced that often like solenoid valves, springs, microswitches, heat exchangers and diffusers plates.

In every category you can search, with the help of the filter, for the espresso machine brand you need replacement parts for. If you can’t find the part your looking for don’t hesitate to contact us.

Espresso machine brewing group parts

Locking group gasket

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€4.02

La Cimbali gigleur 0.5mm

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...
€11.69

Gaggia E90/D90 heat exchanger 40x210mm

The heat exchanger on this product page is a OEM/Original Gaggia spare part. This item has the Gaggia part reference number of CA0433/A. This heat exchanger is made from copper. The outer diameter is 40mm and the overall length of this heat exchanger is 210mm. You can use this heat exchanger on the Gaggia D90 and the Gaggia E90
€108.78

o ring gasket silicone 17.86x2.62mm

The o ring on this product page can be used on various espresso machine brands such as Astoria and Wega. The Astoria part reference for this item is 12300026 and for Wega WY12300026  This o ring has been made form silicone. The cord diameter is 2,62mm. the inner diameter of this o ring is 17,86mm. This item has been made in the UK. You can use...
€1.72

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€16.14

Victoria Arduino/Nuova Simonelli shower holder diffuser

The shower screen holder on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino Spare part. The part references for this item are for Nuova Simonelli 07300183.N and for Victoria Arduino 07300183.N. This shower screen holder has been made from machined brass and then provided with a nanotech coating. The outer diameter of this...
€44.39

La Carimali nozzle 1/8"M-1/8"M 1.2mm

The item on this page is a brewing group gigleur/nozzle. This nozzle is used on a variety of Carimali espresso machines. The Carimali part reference number for this item is 22.00806. This brass nozzle has on both sides a 1/8” male thread. The hole in the middle has a diameter of 1,2mm. This item has been made in Italy. This item can be used on the...
€6.82

Astoria Wega portafilter gasket 72x56x8mm

The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217  and the one of Wega is WY12217  The outer diameter of this portafilter gasket is 72mm,...
€2.92

Bezzera solenoid valve drain fitting

The item on this page is a Bezzera solenoid valve discharge fitting and tube. This spare part is a OEM/original Bezzera spare part and has the part reference numbers 5194559, 5194559LL, 5194560LL and 5370313.  The fitting is screwed on the bottom of the solenoid valve where the exhaust port is located. The threads are a female 1/8”. Over the fitting you...
€8.21

Rancilio valve spring 12x22mm

The compression spring on this page is suitable for a variety of Rancilio espresso machines, mainly the older models. Also in various applications from the steam and water valves to the brewing group valves and water inlets. The Rancilio part reference for this item is 39110030. This stainless steel compression spring has a outer diameter of 12mm and a...
€3.27