Mazzer kony 완전한 커피 호퍼 원본

The spring on this product is a OEM/Original Mazzer spare part.  The Mazzer part reference for this item is S000MOB06. This compression spring is the lower micro release spring. This spring has a outer diameter of 13mm a inner diameter of 10,53 and a length of 15mm. This spring has been made in Italy. This spring is used in the doser versions of...

Mazzer Kony 원추형 연삭 블레이드 단상 63mm 원본

The spring on this product page makes sure that the doser lever returns back to it’s original position. This doser spring can be used on various Mazzer coffee grinders. The Mazzer part references are S000MOB03 and S000MOB03/QQQ. This doser return spring has a diameter of 29,7mm and has been made in Italy. You can use this doser spring on a...

The sticker on this page basically says it all. It’s a Mazzer rotation sticker. The reason why they place this seen there are left and right turning motors. You do have also with a variety of brands where the motor spins the left way, like with Mazzer. But there are also brands which have a right turning motor. The blade design of the burrs for such...

On a variety of Mazzer coffee grinders you can find this grind adjustment spring. So, what does this spring do? Well, this spring supports the upper burr holder. So, when the burrs are set on the finest position, but you want to make them a bit coarser. You turn the grind setting adjustment ring outward. The springs will push the upper burr in its correct...

The item on this page is a start relay which is used on various Mazzer coffee grinders. This item is a OEM/Original Mazzer spare part. The part references for this item are S000DIS01, S000DIS02, S000DIS14 and S000DIS14/QQQ. This start relay is the 4CR-1-670 28Z9R. and is used on doser and electronic coffee grinders of Mazzer such as the Mazzer Kony...

On this page you will find the Mazzer burr adjustment ring. When you want a finer or coarser setting on your Mazzer burrs, you just need to turn this brass and threaded adjustment ring inward or outward. You can do this with the adjustment ring pin, with a m5 thread, which stick into the side of the burr adjustment ring(S00SPEA00) on various locations of...

The reduction gear on this page is a OEM/Original Mazzer spare part. The Mazzer part references for this item are S000PIR02, S000PIR02/AQQ and S000PIR02-A. This reduction gear has been made from brass. The outer diameter is 41mm. The gear has in total 25 teeth. The item has been made in Italy. This reduction gear can be used on the doser and electronic...