로켓 모짜피아토 에볼루지오네
Drain valve chrome plated
This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring.
This coffee machine part for the E61 style group is...
€5.90
Rocket heating element 1200W 115V 1"
The heating element on this product page is a OEM/original Rocket spare part. This heating element can be used in various Rocket models. The Rocket part reference number for this heating element is C199901552.
This heating element produces 1200W at 115V. There are 2 connecting poles. The immersion depth of this heating element is 127mm. the flange of...
€212.05
스테인리스 스틸 필터 8.6x22.5mm
이 제품 페이지의 항목은 스테인레스 스틸 정수 필터로, 이 필터는 브루잉 그룹의 최상위에 있는 다양한 에스프레소 머신 브랜드와 함께 사용됩니다. ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni 및 wega와 같은 브랜드에서 이 필터를 찾을 수 있습니다. 이 스테인레스 스틸 정수 필터는 외경이 8,5mm이고 전체 길이가 22mm입니다. 이 정수 필터는 이탈리아에서 제조되었습니다. 이 정수 필터는 Vibiemme Domobar, Vibiemme Replica, Vibiemme Lollo, Grimac Mia, Grimac Zola,...
€2.77
Portafilter gasket 73X57X8.5mm
This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac.
Of this...
€3.34
Rocket ode solenoid valve 2 way 1/8" 230/240V
On this page you will find a 2 way solenoid a ODE solenoid valve. This valve is made by ODE in Italy, the part number of this item is: 21JN1R0V23-TS
This 2 way solenoid valve has a in and outlet, they are both 1/8” BSP. The orifice in the solenoid valve has a diameter of 2,3mm and is in it’s closed position sealed of with a FKM seal. The body...
€62.48
Faema E61 소매
이 페이지에서 camme 가이드 투관을 찾을 수 있습니다. 이 부분은 Faema E61 양조 그룹과 E61 스타일로 만든 양조 그룹에 대한 일반적인 부분입니다. 이 부분은 28mm의 총계 길이로 고급장교에서, 외부 차원입니다 15와 10 mm 만듭니다. ID는 8mm이고 투관의 머리에는 5mm의 간격이 있습니다.이 부속은 캠메 갱구 떨어져 갱구에 미끄러지고 EPDM 갱구 틈막이에 대하여 머리를 밀어냅니다. 다른 쪽에 camme 압축 봄은 그것에 대해 밀어. 이 봄은 압력의 동등한 양을 가진 틈막이에 대하여, 틈막이는 누출하지 않을 것입니다.Camme 가이드 버스는 E61 스타일 양조 그룹을 사용하는 다양한 브랜드에 의해 사용됩니다...
€2.52
Drain valve assembly
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm.
This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17
Rocket safety valve 3/8" M
The item on this product page is a OEM/Original Rocket spare part. This item is a boiler safety valve and has the Rocket part reference of A299904998.
This boiler safety valve has a male 3/8” BSP-G thread. The opening pressure of this valve has been set at 1,8 bar. The hose end fitting side has a diameter of 7mm. This valve has been made in Italy....
€69.02
Gasket AFM 34 22x16x2mm
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac,
This gasket has been made from the material AFM 34 made by the german company...
€1.21