ECM Heidelberg 상표의 상품 목록

The item on this page is not a standard type of ball valve, this ia 3 way ball valve. This item is used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is P3528. This ball valve has in total 3 fitting connections. These are all female ¼”fittings. This ball valve has been made in Italy. You...

The item on this page is a capillary tube used for attaching a manometer to a boiler. This model of Capillary tubing can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number is P6051 This copper capillary tubing has on each side a female 1/8” fitting. This item has been made in Italy. You can use this...

The contact thermostat on this page is a OEM/Original ECM Heidelberg spare part.  this thermostat us used as a boiler safety thermostat. The ECM Heidelberg part reference number for this item is C199901549 This thermostat is called a contact thermostat. At the bottom is a male M4 thread. This type is a manual reset model, so when it trips it needs...

The level regulator can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is M2004 This Gicar level regulator is called the Dosatura Manuale Deluxe SSR 230Vac. Which has the Gicar part reference number of 9.9.36.12G00. This level regulator can be used on the ECM Heidelberg Mechanika, ECM...

The item on this page is a expansion valve, which is used in various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item are P2555.K and P7000. This expansion valve can be used on various ECM Heidelberg coffee machines such as the ECM Heidelberg Elektronika II Profi, ECM Heidelberg Elektronika Profi and the ECM...

The item on this page is a small rubber gasket, which can be used on various ECM Heidelberg espresso machines. this specific item is used in various steam and water valves, to close off the valve itself. The part reference numbers for this item are P6000.2 and P6002.2  This gasket has been made from EPDM. The outer diameter is 9mm and the...

On this product page you will find a bipolar switch which is suitable to use on various model of ECM Heidelberg. The ECM Heidelberg part reference of this item is P9114  This bipolar switch is black an has a 0(off) 1(on) silk printed on it. The switch is rated up to 16A at 250V. The mounting hole is 13x20mm. You can use this switch on the ECM...

On this page you will find a light green indicator light used in a variety of espresso machines made by ECM Heidelberg. This light green indicator light has the ECM Heidelberg part reference of B7633618  This light green indicator light is a 230V model. The head of the light is 18mm. The hole needs to be 12mm. It is rated up to 120°C. This light...

On this page you will find a orange indicator light used in a variety of espresso machines made by ECM Heidelberg. This orange indicator light has the ECM Heidelberg part reference of B7633617  This orange indicator light is a 230V model. The head of the light is 18mm. The hole needs to be 12mm. It is rated up to 120°C. This light has been made...

The steam tube on this page can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is P6002. This steam tube has been made from stainless steel. the outer diameter of the tube is 10mm. The tube has been fitted with a anti scorch sleeve. The developed length is 250mm. The steam tip has in total 2...

The steam and water valve axle on this page is a OEM/Original ECM Heidelberg spare part. The part reference for this item is P6000.4. This valve axle has a length of 65mm and has been manufactured in Italy This item does not come with the o rings nor the flat valve gasket. You can use this steam and water valve axle on the ECM Classica II, ECM...

The o ring on this product page is used as a heating element o ring on various ECM Heidelberg espresso machine models. The o ring has a ECM Heidelberg part reference number of P9013. This o ring is made from EPDM. The internal diameter is 37,47mm and the cord diameter is 5,34mm. This o ring has been made in Italy. You can use this O ring on the ECM...