Vibiemme 상표의 상품 목록

The Bremas switch on this page you will mainly find in a variety of Vibiemme espresso machine models. The Vibiemme part reference number for this item is ELETCOM. The main part reference of Bremas is CS0178334PL1PV, the extra references are in the extra info tab. This Bremas switch is a main power switch with 3 positions, 0-1-2. This switch is rated up...

Bremas 메인 스위치 20A 0-1-2

The capacitor on this page is a 20µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.2564. This capacitor can be found on a variety of coffee grinders such as Vibiemme, Mazzer, Fiorenzato C.s. and Macap. This capacitor produces 20µF at 450V 50-60Hz. The max and minimum temperature ranges...

The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...

이 페이지에 교체 펌프는 이탈리아 제조자 유동성 o 기술에 의해 합니다, 펌프 유형은 액체 o 기술 제조자 부호를 가진 모형 “표준”로 지정됩니다: PA0104AGANN0000의 경우 회전 펌프의 이 모형은 죔쇠 반지 유형입니다. 펌프 얼굴과 모터 얼굴은 각각에 대하여 밀어지고 스테인리스 강철 죔쇠는 주변에 둡니다. 이 죔쇠는 나사로 바짝 죄집니다. 이것은 적당한 위치에 있는 펌프에 붙듭니다. 이 특정한 펌프에는 100 L/H의 흐름율이 있고 균형 잡힌 우회로 갖춰집니다. 펌프 압력을 변경하려면. 당신은 검정 플라스틱 hex를 untighten 필요가 그래서 당신은 나사 틈새를 가진 hex를 안으로 또는 밖으로 실 수 있습니다....

On this product page you will find a heating element suitable for various VBM heating elements. This heating element is suitable for 2 group Vibiemme boilers. The Vibiemme part reference is ELETRES2G4023. This heating element produces 4000W at 230V and has 4 connecting poles. The immersed length of the heating element is 330mm. the heating element has a...

The pressure switch on this product page is made by the Italian company Ma-Ter. This company produces a variety of pressure switches.  This pressure switch is mainly used on Vibiemme espresso machines. The Mater part reference number for this item is XP742C410015. The Vibiemme part reference number for this item is ELETPREDSUKIR  This pressure...

The solenoid valve on this page is a product made by ODE. In this case it is a 2 way solenoid valve with the part number 212A3KV30. As mentioned this solenoid valve is a 2 way valve. The in and outlet on this valve are both 1/8” BSP female. In the body of the solenoid valve is a orifice located with the diameter of 3mm. So seal this off there is a...

The solenoid valve on this product page is one made by the Italian company ODE. This solenoid valve can be used on various Vibiemme (VBM) water inlet valves. The Vibiemme part reference number is ELETELE2VAU22. This Solenoid valve is a 2 way valve. Both the in and outlet side have a 1/8” BSP-G thread. The diameter of the orifice is 1,5mm. The seal...

The gasket on this product page is made from PTFE. This type of gasket is used with various brands such as ECM Heidelberg, Marzocco, Vibiemme and Fiorenzato. The part references are for ECM Heidelberg P6003.10, for Marzocco H.2.002, for Fiorenzato A1200009 and for Vibiemme GUARTEF24192. This gasket has been made from PTFE.  The outer diameter...

On this product page you will find a pump pressure gauge suitable for the Vibiemme Domobar Super. This manometer has the Vibiemme part reference MANMSEM16. The manometer is a pump pressure manometer with a reach from 0 to 16bar.  The body of this manometer has a outer diameter of 41mm and a rim diameter of 50mm. On the back is a copper tube with a...

The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and  MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13  This stainless steel...