필터링 기준
Price
비비엠
유형 부분
Filter

Vibiemme E61 스타일 그룹

각종 Vibiemme 에스프레소 기계, 국내 및 상업에 사용되는 레버 양조 그룹은 Faema E61 그룹에 근거를 둡니다. 그러나 많은 구성 요소가 다릅니다.

그룹의 상단에, 상단 섹션에서 배수 슬리브를 찾을 수 있습니다 노즐 설치. 압축 스프링을 찾을 수 있습니다 (13x42mm)와의 길이를 가진 주둥이 벨브 54.6mm.

양조 그룹의 중간에서 당신은 캠 샤프트를 찾을 수 있습니다. 레버 메커니즘이 붙어있는 곳입니다. 그것은 2개의 갱구 틈막이, 금관 악기 소매 및 압축 봄로 밀봉됩니다.

수동 VBM 양조 그룹의 밑바닥 단면도에서는, 당신은 또한 각종 벨브를 찾아낼 수 있습니다. 배수 슬리브에서 압축 스프링을 찾을 수 있습니다 (14x45mm) 양조 밸브. 이 벨브에는 62mm의 길이가 있습니다. 아래에서 배수 밸브와 배수 스프링을 찾을 수 있습니다. 이 압축 스프링은 14x33mm와 하수구 벨브에는 27mm의 길이가 있습니다.

이 그룹에 사용된 portafilter 틈막이에는 57mm의 안 직경 73mm의 외부 직경이 있습니다. 이 VBM 그룹을 위해 당신은 5,5mm 귀를 가진 표준 VBM portafilter를 사용할 수 있습니다.

Vibiemme Cubo, Vibiemme Domobar, Vibiemme Domobar Junior, Vibiemme Domobar Super 및 Vibiemme Replica에서이 양조 그룹을 찾을 수 있습니다.

Vibiemme 부품 - E61 스타일 브루잉 그룹

Vibiemme E61 스타일 그룹

용접하지 않고 E61 스타일 그룹 샤워 60mm

샤워 스크린의 기능은 그룹에서 나오는 물을 커피 위에 균등하게 퍼뜨리는 것입니다. 표준화된 크기 중 하나이며 가장 일반적인 것은 60mm 샤워 스크린입니다. 이 샤워기는 IMS IMSDR300에서 만든 프레스 모델입니다. 외경 60mm, 내경 17mm, 천공구멍 직경 2.5mm 참고: 이것은 스페셜티 커피 샤워가 아니지만 IMS는 일반 샤워도 제공합니다. 이 샤워 스크린에는 2가지 유형의 천공이 있습니다. 첫 번째는 원형 패턴의 구멍이 있고 그 아래에 미세한 스테인리스 스틸 메쉬가 있는 금속판입니다. 샤워 스크린에는 장착 구멍이 없지만 포터필터 개스킷으로 고정됩니다. 이 특정 샤워 스크린은 Vibiemme, La Scala, San...
€4.02

Faema E61는 camme 홀더를 위한 마개를 폐쇄합니다

이 1⁄2” 크롬에 의하여 도금되는 짜는 견과에는 10,7mm의 중앙 구멍이 있습니다. 품목 자체에는 17mm의 고도가 있습니다. 이 아이템을 설치하기 위해 미터 키 22가 필요합니다. 이것은 대부분의 사람들 도구 상자에서 꽤 일반적인 키 크기입니다. 그러나이 부분의 기능은 무엇이며 어디에서 찾을 수 있습니다.이 실을 꿴 짜기 동맥은 Faema E61, Faema E61 전설 및 E61 작풍 양조 그룹의 측에서 사용됩니다. EPDM 물개를 밀봉하기 위해 먼저 캠메 샤프트를 밀봉하는 것은 EPDM 가스켓에 대해 밀어 금관 악기 투관이 있습니다. 압력은 15x25mm camme 갱구 압축 봄에서 옵니다. 이 압축 봄은 이 크롬에 의하여...
€7.11

Portafilter gasket 73X57X8.5mm

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
€3.34

Vibiemme single coffee portafilter original

The single portafilter shown on this product page is a OEM/Original Vibiemme espresso machine spare part. The Vibiemme part reference for this item is ASPORTN1TBMON. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a...
€89.61

Faema E61 위장 봄 15x25mm

15x25mm의 차원을 가진 이 스테인리스 압축 봄은 일반적으로 Faema E61 양조 그룹에 camme 봄으로 또는 E61 작풍 양조 그룹 사용됩니다. Faema E61, Faema E61 전설, Grimac, Isomac, Pavoni, Wega 및 양조장 그룹의 e61 스타일의 다양한 브랜드와 같은.그 옵션 외에도이 모델 압축 스프링은 Marzocco GB5 및 FB80에 스팀 wand에도 사용됩니다.그러나 큰 질문은, 이 봄은 위장 스프링으로합니까? 이 압축 봄은 camme 갱구의 주위에 찾아낼 수 있습니다. 캠메 샤프트를 밀봉하려면 2 EPDM 평면 가스켓이 있습니다. 가스켓은 펌프 압력에 따라 압박되고, 어쨌든 누출을...
€1.21

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17

Drain valve chrome plated

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61...
€5.90

Wera 샤워 스크린 스크루드라이버

몇몇 경우에, 샤워 스크린은 필립스 또는 배열한 나사인 대부분의 경우에 나사로 붙어 있습니다. 양조 그룹에서 제한된 높이로 인해 정기적인 스크류 드라이버로 제거하기가 어렵습니다. 그러나 당신이 짧게 한 slotted screwdriver가 필요하지만,이 경우 독일 브랜드 Wera에서 하나, 양조 그룹에서 잘 맞는 그래서 그것은 unscrew 및 그것을 밖으로 미끄러지지 않습니다. Screwdriver에는 1,2mm의 간격과 8mm의 폭이 있습니다 표준과 같은 톱 슬롯을 사용하는 몇 가지 브랜드가 있습니다 Nuova Simonelli, La Pavoni, Victoria Arduino · Carimali. ·. 그러나 다른 유형도...
€11.50

E61 cam lock stainless steel m6

This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...
€5.29

Knob M8x1,25mm

This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg. This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy. You can use this...
€7.51