필터링 기준
ECM 하이델베르크
유형 부분
more... less
유형
Filter

ECM 하이델베르크

독일 커피 기계 제조 업체 ECM은 가장 최근 에스프레소 기계 제조업체 중 하나입니다. 전체 이름은 Espresso Coffee Machine Manufacturing Gmbh이며 일부 사람들은 ECM Heidelberg에 전화합니다.

ECM 상표는 국내 커피 기계에서 주로 고명합니다. 이 에스프레소 기계는 E61 작풍 양조 그룹과 거의 모든 맞습니다. 3개의 보일러 버전은 단 하나, 이중 및 열교환기 보일러 있습니다.

단일 보일러는 예를 들어 ECM Puristika, ECM Casa V 및 ECM Classika PID입니다. 두 배 보일러는 ECM Synchronika espresso 기계를 위해 입니다. 가장 일반적인 버전은 열교환기 (HX)입니다.

국내 에스프레소 기계는 서로 많은 유사성을 가지고 있지만 많은 차이도 있습니다. 이것은 수동 E61 양조 그룹 또는 솔레노이드 운영한 것과 같은 특징에 달려 있습니다. 물 탱크에 장착 된 커피 기계 또는 주요 물 연결이 있습니다. 보일러의 온도는 압력 스위치로 또는 더 정확한 PID 온도 관제사로 통제됩니까?

그러나 ECM은 ECM Elektronika Profi Due, ECM Compact HX-2 PID 및 ECM Barista A2 espresso 기계와 같은 모델이있는 일부 상업 에스프레소 기계를 구축합니다.  이 에스프레소 기계는 모두 일반적인 한 가지를 가지고 있으며, 대부분의 국내 ECM 에스프레소 머신을 볼 때 솔레노이드 작동 및 수동 양조 그룹이 아닙니다.

상업 및 국내 에스프레소 기계 옆에 다양한 커피 그라인더가 있습니다. ECM Titan, ECM S-Automatik, ECM S-Manuale 및 ECM C-Manuale와 같은 까다로운 커피 그라인더에 적합합니다. 이 커피 그라인더는 burrs의 크기, 54mm에서 64mm까지.

ODE 2 way solenoid valve 1/8" 230V 5W ODE 2 way solenoid valve 1/8" 230V 5W

ODE 2 way solenoid valve 1/8" 230V 5W

The solenoid valve on this page has been manufactured by the Italian company ODE. The valve on this page is a 2 way solenoid valve with the ODE part number 21JN1R0V23. The solenoid valve is a 2 way valve. The in and outlet of this valve has a 1/8” BSP thread. The orifice in the solenoid valve has a diameter of 2,3mm and is sealed of with a FKM seal. The...
€45.74
Quick-view
Spring for steam valve Spring for steam valve

Spring for steam valve 13x27mm

This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return...
€3.80
Quick-view
Hardened steel shaft lever tap Hardened steel shaft lever tap

Hardened steel shaft lever tap

The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
€12.20
Quick-view
Hardened steel insert Hardened steel insert

경화강 인서트

The item on this page is a hardened steel bush used on various steam and water valves. This item can be used on brands such as Vibiemme, Marzocco, ECM Heidelberg and Fiorenzato. The ECM Heidelberg part reference number is P6003.2, for Fiorenzato it is A2200265, for Marzocco it is B.1.004/2 and for Vibiemme it is RACCINSRUBLOL. This steel bushing has...
€5.22
Quick-view
T shape hose fitting 8mm T shape hose fitting 8mm

T shape hose fitting 8mm

This T-shaped fitting on this page can be used on variety of domestic espresso machines. You can use this type of T fitting with brands such as Gaggia, Rocket and Saeco. The Gaggia part reference for this item is 147920300, for Rocket the part reference is C400002827 and for Saeco it is 147920300  This T shaped fitting has been made from plastic and can...
€4.49
Quick-view
Lever switch 16A 250V Lever switch 16A 250V

Lever switch 16A 250V

This classical style of on/off switch can be used with brands such as ECM Heidelberg and Vibiemme. The ECM Heidelberg part reference is C199900087 and the Vibiemme part reference is ELETINTLEVMET. This switch is a toggle switch which has been rated up to 16A at 250V. The hole diameter for this switch is 12mm. You can use this switch on the Vibiemme...
€15.25
Quick-view
Faema E61 chromed group collector Faema E61 chromed group collector

E61 크롬 그룹 수집가

이 페이지에 하수구 벨브는 양조 그룹의 각종 E61 작풍에 사용될 수 있습니다. ECm, ECM Heidelberg, La Pavoni와 같은 모델, Rocket 그리고 Vibiemme 에스프레소 기계. Faema E61에 이 하수구 벨브는 고급장교의 한 조각에서 기계로 가공되었습니다. 그 후 광택, 니켈 도금 및 마지막으로 크롬 도금 도금. 이 품목은 이탈리아에서 합니다. 이 하수구 벨브는 ECM Giotto, ECM Veneziano, ECM Heidelberg Classika II, ECM Heidelberg Mechanika, Pavoni Giotto, Pavoni Botticelli에 사용될 수 있습니다. Rocket...
€65.82
Quick-view
O ring epdm 2,62x13,95mm

O ring epdm 2,62x13,95mm

The o ring on this page can be used with various espresso machine brands such as Spaziale, ECM Heidelberg, Conti and La Carimali. The ECM Heidelberg part reference number is P6020.3, the Conti part reference number is 61200, the Spaziale part reference number  is 460 Tis o ring has been made from EPDM. The cord diameter is 2,62mm and the internal diameter...
€1.34
Quick-view
Drain valve chrome plated

Drain valve chrome plated

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...
€5.90
Quick-view
Brass o ring guide Brass o ring guide

Brass o ring guide

The item on this page is a hardened brass gasket holder for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.5, the Fiorenzato part reference is A2200268 , the Marzocco reference is B.1.004/5  and...
€5.50
Quick-view
Bush pipe ball Bush pipe ball

황동 증기 파이프 부싱

이 페이지에서 황동 증기 파이프 부싱을 찾을 수 있습니다. 그러나 파이프 부싱이란 무엇입니까? 파이프 부싱을 사용하면 스팀과 물봉을 새지 않고 자유롭게 움직일 수 있습니다. 어떻게 작동합니까? 파이프 부싱에는 밸브 측면에 2개의 O 링이 있으며, 이 링은 밸브 내부 측면에 대해 밀봉됩니다. 그러나 파이프 부싱의 상단 링에도 스프링을 위한 장소가 있습니다. 이 스프링은 또한 스팀 및 물 막대에 약간의 강성을 제공합니다. 스프링이 있기 때문에 스팀 완드가 움직이면 고정된 위치에 유지됩니다. 스프링이 없으면 가장 낮은 지점으로 떨어집니다. 스팀 완드를 밸브에 밀봉하려면 스테인리스 볼(스팀 완드 끝에 있음)과 황동 스팀 파이프 부싱의...
€5.04
Quick-view
Wera 샤워 스크린 드라이버 philips Wera 샤워 스크린 드라이버 philips

Wera 샤워 스크린 드라이버 philips

양조 그룹에 있는 샤워 스크린이 나사로 붙어 있는 에스프레소 기계에 확실히 일반적입니다. 문제는 양조 그룹과 드립 트레이 사이의 공간은 일반적으로 정상적인 스크루 드라이버를 위해 너무 작습니다. 그래서 우리는 Wera 짧은 버전 screwdrivers가 있습니다. 이 특정한 모형은 필립스 머리와 조화하여 사용하기에 적당합니다. pH2 모델입니다. 이 특정한 모형은 독일 회사 Wera에 의해 하고, ph2 나사에 진짜로 단단한 적합이 있습니다. 많은 에스프레소 기계 상표 사용 필립스 유형 나사와 같은 La Cimbali, Casadio, Gaggia, Brasilia, Astoria, Bezzera. ·. 또한 같은 브랜드 San...
€12.87
Quick-view
Contact thermostat 135°C M4...

Contact thermostat 135°C M4 16A 250V

The item on this product page is a contact thermostat. This model of thermostat can be used on various brands such as ECM and ECM Heidelberg. The part references are for ECM C199901550  and for ECM Heidelberg C199901550  This contact thermostat is rated on 135 degree Celsius. The max amps for this thermostat is 16A at 250V. Once the thermostat has been...
€16.21
Quick-view
Non return valve 1/8"MM Non return valve 1/8"MM

Non return valve 1/8"MM

The item on this page is a non return valve. This non return valve can be used on various coffee machine brands such as Astoria, Brasilia, ECM, ECM Heidelberg, Pavoni, Rancilio, Saeco and Vibiemme. The Astoria part reference is 20358, for brasilia it is 01119.4.00.09, for ECM C229900540, for ECM Heidelberg C229900540, Pavoni 453200 , Rancilio 10060505 and...
€13.54
Quick-view
CEME 2 way solenoid valve 1/8" F 120V CEME 2 way solenoid valve 1/8" F 120V

CEME 2 way solenoid valve 1/8" F 120V

The solenoid valve on this page is made by the Italian company Ceme. This specific solenoid valve is used on various espresso machine brands such as ECM Heidelberg, Nuova Simonelli, San Marco and Vicotria Arduino. The ECM Heidelberg part reference is US1005, for Nuova SImonelli 04100043, for San Marco 108677A, CCEELE0020  and for Victoria Arduino the...
€35.69
Quick-view
ECM heidelberg indicator...

ECM heidelberg indicator light green 230V

On this page you will find a light green indicator light used in a variety of espresso machines made by ECM Heidelberg. This light green indicator light has the ECM Heidelberg part reference of B7633618  This light green indicator light is a 230V model. The head of the light is 18mm. The hole needs to be 12mm. It is rated up to 120°C. This light has been...
€16.99
Quick-view
ECM capillary tubing 1/8"FF

ECM capillary tubing 1/8"FF

The item on this page is a capillary tube used for attaching a manometer to a boiler. This model of Capillary tubing can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number is P6051 This copper capillary tubing has on each side a female 1/8” fitting. This item has been made in Italy. You can use this capillary...
€21.20
Quick-view
ECM Heidelberg stainless steel steam wand ECM Heidelberg stainless steel steam wand

ECM Heidelberg stainless steel steam wand

The steam tube on this page can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is P6002. This steam tube has been made from stainless steel. the outer diameter of the tube is 10mm. The tube has been fitted with a anti scorch sleeve. The developed length is 250mm. The steam tip has in total 2...
€144.47
Quick-view
Ball valve 1/4" FFF Ball valve 1/4" FFF

Ball valve 1/4" FFF

The item on this page is not a standard type of ball valve, this ia 3 way ball valve. This item is used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is P3528. This ball valve has in total 3 fitting connections. These are all female ¼”fittings. This ball valve has been made in Italy. You can use this...
€98.32
Quick-view
Indicator light orange 230V Indicator light orange 230V

ECM Heidelberg Indicator light orange 230V

On this page you will find a orange indicator light used in a variety of espresso machines made by ECM Heidelberg. This orange indicator light has the ECM Heidelberg part reference of B7633617  This orange indicator light is a 230V model. The head of the light is 18mm. The hole needs to be 12mm. It is rated up to 120°C. This light has been made in Italy....
€15.43
Quick-view
Water drawing tube 1/8"M - 1/4" M Water drawing tube 1/8"M - 1/4" M

Water drawing tube 1/8"M - 1/4" M

The item on this product page is a water drawing tube and is a OEM/Original Rocket spare part. The Rocket part reference for this item is C229900393. This water drawing tube has a length of 91mm and the tube diameter is 6mm. The fitting itself has 2 types of thread. A male 1/8”BSP-G and a ¼” BSP-G This water drawing tube can be used...
€17.48
Quick-view
Water inlet water filter Water inlet water filter

Water inlet water filter

The water inlet filter on this page is used on various coffee machine brands such as Saeco, Rheavendors, spinel and ECM Heidelberg. The ECM Heidelberg part reference number for this water filter is C439900695  This water filter has a 8mm inlet and a 8mm outlet. In this filter is the filter net. This filter net is 500 micron. You can use this filter on the...
€2.57
Quick-view
Spring for steam valve 10.8x30 mm Spring for steam valve 10.8x30 mm

Spring for steam valve 10.8x30 mm

The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and  MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13  This stainless steel compression spring...
€4.09
Quick-view
ECM contact thermostat...

ECM contact thermostat 165°C m4

The contact thermostat on this page is a OEM/Original ECM Heidelberg spare part.  this thermostat us used as a boiler safety thermostat. The ECM Heidelberg part reference number for this item is C199901549 This thermostat is called a contact thermostat. At the bottom is a male M4 thread. This type is a manual reset model, so when it trips it needs to be...
€34.23
Quick-view
ECM water steam valve axle...

ECM water steam valve axle 65mm

The steam and water valve axle on this page is a OEM/Original ECM Heidelberg spare part. The part reference for this item is P6000.4. This valve axle has a length of 65mm and has been manufactured in Italy This item does not come with the o rings nor the flat valve gasket. You can use this steam and water valve axle on the ECM Classica II, ECM...
€46.75
Quick-view
ECM expansion valve 1/8" M ECM expansion valve 1/8" M

ECM expansion valve 1/8" M

The item on this page is a expansion valve, which is used in various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item are P2555.K and P7000. This expansion valve can be used on various ECM Heidelberg coffee machines such as the ECM Heidelberg Elektronika II Profi, ECM Heidelberg Elektronika Profi and the ECM...
€80.77
Quick-view
O ring EPDM 1.78x6.75mm

O ring EPDM 1.78x6.75mm

The o ring on this product page can be used with various espresso machine brands in steam and water valve. You can find them with brands such as Casadio, ECM Heidelberg, Cimbali, Grimac, Faema and Nuova Simonelli. This o ring has been made from EPDM. The cord diameter for this o ring is 1,78mm and the internal diameter is 6,75mm. This o ring has been made...
€1.23
Quick-view
ECM Heidelberg bipolar switch 16A 250V ECM Heidelberg bipolar switch 16A 250V

ECM Heidelberg bipolar switch 16A 250V

On this product page you will find a bipolar switch which is suitable to use on various model of ECM Heidelberg. The ECM Heidelberg part reference of this item is P9114  This bipolar switch is black an has a 0(off) 1(on) silk printed on it. The switch is rated up to 16A at 250V. The mounting hole is 13x20mm. You can use this switch on the ECM Heidelberg...
€12.44
Quick-view
ECM doser control box 1 group ECM doser control box 1 group

ECM doser control box 1 group

The level regulator can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is M2004 This Gicar level regulator is called the Dosatura Manuale Deluxe SSR 230Vac. Which has the Gicar part reference number of 9.9.36.12G00. This level regulator can be used on the ECM Heidelberg Mechanika, ECM...
€377.49
Quick-view
PTFE gasket 24x19x2mm

PTFE gasket 24x19x2mm

The gasket on this product page is made from PTFE. This type of gasket is used with various brands such as ECM Heidelberg, Marzocco, Vibiemme and Fiorenzato. The part references are for ECM Heidelberg P6003.10, for Marzocco H.2.002, for Fiorenzato A1200009 and for Vibiemme GUARTEF24192. This gasket has been made from PTFE.  The outer diameter is 24mm, the...
€1.53
Quick-view
O 반지 틈막이 epdm 5,34x37,47m m/분

O 반지 틈막이 epdm 5,34x37,47m m/분

The o ring on this product page is used as a heating element o ring on various ECM Heidelberg espresso machine models. The o ring has a ECM Heidelberg part reference number of P9013. This o ring is made from EPDM. The internal diameter is 37,47mm and the cord diameter is 5,34mm. This o ring has been made in Italy. You can use this O ring on the ECM...
€2.01
Quick-view
접착 풋 3M SJ5023...

접착 풋 3M SJ5023 20,5x20,5x7.6mmmm

이 접착식 풋은 Bezzera, ECM, Gaggia, Pavoni, Saeco 등 다양한 에스프레소 머신 브랜드에 사용할 수 있습니다. 하지만 기본적으로 원하는 모든 머신에 사용할 수 있습니다. 다리는 20,5x20,5mm이고 높이는 7.6mm입니다. 이 다리는 뒷면에 접착층이 있습니다. 이 제품은 미국에서 제조되었습니다. 전체 호환성 목록은 추가 정보 탭에서 확인하세요.
€0.87
Quick-view
ECM 정전기 정류기 25A - 에스프레소 머신을 위한 OEM ECM 정전기 정류기 25A - 에스프레소 머신을 위한 OEM

ECM 정전기 정전기 25A - OEM

ECM 에스프레소 머신용 신뢰할 만한 OEM 정적 릴레이. 고부하 응용에 정밀하게 대응할 수 있도록 설계되었습니다. 브랜드: ECM 유형: 정적 릴레이 부하 등급: 240V에서 최대 25A 입력 전압: 4-32V DC OEM 품질 다양한 ECM 에스프레소 머신 모델과 호환됩니다.
€56.45
Quick-view