0
내 장바구니
Grimac Twenty 부품
Astoria Wega tap joint spring 11,4x16mm
The compression spring on this page is mainly used with the steam and water valves on the Astoria and Wega espresso machines. But it has also multiple purposes in the steam valve. This item is a OEM/Original item. The Astoria part number is 10452 and the Wega part number is WY10465.
This compression spring is used to put pressure on the shaft gasket...
€2.02
Parker 솔레노이드 밸브 2방향 베이스 마운팅 220/230V 50/60Hz 9W
이 페이지에서 회사 Parker가 만든 2 가지 솔레노이드 밸브를 찾을 수 있습니다. 이 특정한 Parker 2 방법 솔레노이드 벨브는 보일러를 채우기를 위한 물 인레트 벨브로 각종 상표로 사용됩니다. 이 아이템의 파커 부품 번호는 393233J·
이 2 방법 솔레노이드 벨브는 플랜지 모형이 있는 유형의 한개입니다, 이 모형은 플랜지의 바닥에 2개의 o 반지로 밀봉됩니다. 이 솔레노이드 벨브에 사용되는 벨브는 50/60 Hz에 220/230V입니다. 사용된 코일 수는 9W의 ZB09입니다.
벨브 안쪽에 오리피스에는 2,5mm의 직경이 있고 FKM 물개를 가진 닫히는 위치에서 밀봉될 것입니다. 이 벨브의 최대 일 압력은 10...
€80.75
Wera 샤워 스크린 드라이버 philips
양조 그룹에 있는 샤워 스크린이 나사로 붙어 있는 에스프레소 기계에 확실히 일반적입니다. 문제는 양조 그룹과 드립 트레이 사이의 공간은 일반적으로 정상적인 스크루 드라이버를 위해 너무 작습니다. 그래서 우리는 Wera 짧은 버전 screwdrivers가 있습니다. 이 특정한 모형은 필립스 머리와 조화하여 사용하기에 적당합니다. pH2 모델입니다. 이 특정한 모형은 독일 회사 Wera에 의해 하고, ph2 나사에 진짜로 단단한 적합이 있습니다. 많은 에스프레소 기계 상표 사용 필립스 유형 나사와 같은 La Cimbali, Casadio, Gaggia, Brasilia, Astoria, Bezzera. ·. 또한 같은 브랜드 San...
€12.87
Conical PTFE gasket 14.5x9x8mm
The item on this page is a conical PTFE gasket. This gasket is a OEM/Original Grimac spare part. This is used between the steam tube and the steam valve. This PTFE gasket does not come with the o ring. The Grimac part references for this item are 1110300003 and GR269
This conical PTFE gasket has a outer diameter of 14,5mm a inner diameter of 9mm...
€3.30
Grimac steam wand
The item on this product page is a steam wand which can be used on various Grimac espresso machines. The part reference numbers are 1260200031 and GR211.
This steam wand comes as ready to install assembly. This item comes with the nut, tube and the steam tip. This item has been made in Italy.
This steam tube can be used on the Grimac G10, Grimac Zola I,...
€60.92
Grimac boiler pump pressure gauge 0-2.5 / 0-16 bar
On this product page you will find a double scale manometer suitable for various Grimac espresso machines. The Grimac part reference for this manometer is 1250200034-GRC106.
This double scale manometer has for the pump side a scale range of 0 to 16 bar. For the boiler pressure side the scale ranges from 0 to 2,5bar. The manometer has a body diameter of...
€50.44
Dosing device DOS 2GR+RL/F-C 240V
On this product page you will find a dosing device suitable for the Grimac Eclisse and the Grimac G10 espresso machine. The Grimac part reference for this item is GRC103 – 1040200008.
This dosing device has been manufactured by the Italian company Giemme, the part reference is 01.13.0128. The name of this device is DOS 2GR+RL/F-C and runs on 240Vac.
€291.47
E61 스타일 캠 홀더
이 제품 페이지의 캠 홀더는 다양한 E61 양조 그룹에 사용될 수 있습니다. ECM Heidelberg, La Scala, Bezzera, Grimac, La Pavoni Wega 및 Brasilia와 같은.
이 페이지의 캠 홀더는 기계로 가공한 고급장교에게서 했습니다. 니켈과 크롬 도금이 된 것. 더 쉬운 임명을 위해 가장자리는 떨어져 돌았습니다. 품목에는 39mm의 전체 길이가 있습니다. 이 품목은 이탈리아에서 했습니다.
La Scala Butterfly, Bezzera Galatea, Bezzera Galatea Domus, Pavoni Bart, Pavoni Bar, Wega Airy, Wega Polaris, Wega...
€26.01
Black bipolar switch 10A 250V
On this product page you will find a black bipolar switch. This switch is used with various brands such as Nuova Simonelli and Grimac. The part reference for Nuova Simonelli for this item is 04200057 and for Grimac the reference is 1160200091.
This bipolar switch is rated for 10A at 250V. On the face of the switch is a silk printing with a 0 and 1. This...
€6.51
Grimac/Fiorenzato solenoid valve brewing group
The item on this product page is a solenoid valve brewing group, this specific model is used on various Fiorenzato and Grimac espresso machines. The Fiorenzato part references are A2200035 and the Grimac references are 1200500018 and GR500C.
This brewing group is from the E61 type. This item is made from casted and machined brass (OT58), which...
€566.68
Brass valve washer
The item on this product page is a brass washer, which can be used on various steam and water valves on various brands. It can be used on Grimac, Astoria and Wega espresso machines. The Grimac part references are 1300900111, GR776 and W604. The Astoria part reference is 25657 and the Wega references are W10574, WY25657 and WY4625657....
€2.86
Drain valve sleeve
The E61 drain valve sleeve on this page can be used with a variety of E61 style brewing groups. You can use this drain sleeve on Brasilia, Faema, Grimac, Bezzera, Wega, La Scala and Royal brewing groups.
This drain sleeve has been made from machined brass. To reach the shiny chrome surface, the brass has been polished first, then nickel plated and at the...
€84.83
Dosing device RL0 1GR+RL+SIC / F 240V
This dosing device can be used on a Grimac dosing device, only on a single group Grimac Twenty. This dosing device has the Grimac part reference of GRW1130 – 1040200012.
This device has been manufactured by the Italian company Giemme. The Giemme code for this item is 01.13.0126. The name of this item is the DOS RL0 1GR+RL+SIC/F and runs on 234V.
€453.76
Grimac Twenty touchpanel 6 buttons
On this product page you will find a Grimac push button suitable for the Grimac Twenty espresso machine. This touchpanel has the Grimac part reference number 2040300001-GRW159.
The push button panel has in total 5 push button keys and one switch. This switch is the emergency start/stop dispensing switch. The key with the star is the continuous and...
€190.78
Clamp motor IPC 150W 220/240V
On this page you wild find a IPC clamp ring motor(model YDK94/50-4-150B8), suitable for the use with espresso machine pumps. This motor has a wattage of 150W with 220/240V 50/60Hz. To start the motor it uses a 6 µf capacitor.
This model is a clamp ring motor, so the pump will be attached to the clamp ring of the espresso machine motor with a...
€267.11
Grimac level regulator RLC302CF 230V
The shown water level regulator is suitable for the Italy espresso machine manufacturer Grimac. This item has been made by the Italian company Cubic ricercar, with the part number 121;c16
The Grimac part number for this item is 1040100006-GR778 . The product name of this level regulator is RLC302CF this is a 230V version.
You can use this level...
€113.28
Grimac water pipe
The item on this page is a water outlet for various Grimac espresso machine models. This item is a OEM/Original Grimac spare part which has the part reference numbers 1260100017 and GR167.
This water tube is complete and ready to install. You can use this outlet on the Grimac G10, Grimac Zola I, Grimac Zola II, Grimac Twenty and the Grimac Eclisse.
€32.65
Grimac steam water valve spindle
The valve shaft on this page is suitable for various Grimac espresso machines. This steam and water valve axle has the Grimac part reference 1201100038-GR090
This steam and water valve axle does not come with the sealing o rings, these need to be bought additionally. This item has been manufactured in Italy.
This steam and water valve axle can be...
€23.74
Brass washer 15x8x2mm
This brass washer is a OEM/Original Grimac spare part. This brasher is used on the water and steam valves. The part reference number for this item is GR738
This washer has been made from brass. The outer diameter is 15mm the inner diameter is 8mm and the thickness is 2mm. This washer has been made in Italy.
This brass washer can be used on the Grimac...
€1.20
Grimac brass washer 18x11.3x4.5mm
This brass washer is a OEM/Original Grimac spare part. This brasher is used on the water level tube. The part reference numbers for this item are 1300900066, GR296 and GR296.
This washer has been made from brass. The outer diameter is 18mm the inner diameter is 11,3mm and the thickness is 4,5mm. This washer has been made in Italy.
This brass washer can...
€4.01
Grimac brass valve pin
The item on this page is a long spindle pin used in various Grimac steam and water valves. This item is a OEM/Original spare part and has the part reference number of GR739
This pin has been made from machined brass, the item itself has been made in Italy.
You can use this valve pin on the Grimac Twenty, Grimac Eclisse, Grimac Zola 1, Grimac Zola II and...
€3.64
Grimac water inlet valve
the water inlet valve on this product page is a OEM/original Grimac spare part. This inlet valve is used on various Grimac espresso machines. The part reference number for this item is 2200600006-GR001
This water inlet valve comes assembled with all its gaskets, springs and fittings. So it is more or less plug and play.
You can use this water inlet...
€343.34
Grimac heating element 4500W 230V with screw flange
The heating element on this page is suitable for a 3 group Grimac espresso machine. The Grimac part reference of this heating element is 1240100129-GRT103.
This heating element is 4500W at 230V. The element has a 4 pole connection. The immersed length of the element is 345mm. This element is a screw in element and has a 1”1/4 flange.
The suitable heating...
€82.92
Grimac dosing device DOS7 RL3 2GR+RL+THE 240V
The dosing device on this page can be used on the Grimac Twenty espresso machine. The Grimac part reference for this item is GRW156 - 1040200013
The name of this dosing device is DOS7 RL3 2GR+RL+THE 240V
The dosing device has been manufactured by the Italian company Giemme, the part reference for this item is 01.13.0124
€343.37
O 링 가스켓 8x1.9mm 뚱 베어
This o ring is a original/OEM Grimac o ring which is used on various models and in various applications. The Grimac part reference numbers for this item are 1110800040, F067 and GR756.
The o ring itself has been made from Viton. The cord diameter is 1,9mm and the internal diameter is 8mm. This o ring has been made in Italy.
You can use this o ring on the...
€1.06